Well, I got to see one up close and personal. It was a Screaming Yellow
2006 S281 Extreme. Forged internals and making more boost than the S281
S/C. It has 20" wheels with 15" brake rotors and 6 piston calipers. It
also has some carbon fiber pieces on the front and rear valence that

Does anyone have a good, tight set of these they'd be willing to sell
me?  They are scarce around here, and I'd rather have good originals
than repros.  My new hood is 1/2-inch "popped up" at the cowl, and it's
really bugging me.

Ok, have a 65 mustang with a 170 engine 1v carb. When car is warm it runs
great, no problems. Now and then, when I start the car when its cold, it
starts right up, idles fine for about 5 seconds, then begins to idle rough,
it never stalls, but the car shakes a good bit, if I ...

started tonight. Hope it will be warmer April nites before weekend.

How do you identify a ford 9" rear end? There is no tag.....My 70
mustang supposedly has one and I just want to make sure. Thanks...

Hello, all. I asked you guys for help with the 65 Mustang convertible a
long time back, and you came through.
I know you get sick of these requests, but this one's for another
antique, and if we can make sure it's legal, I get to drive it this

http://www.autoblog.com/2006/04/07/jim-padilla-to-step-down-as-fomoco-
president-and-coo/
Copy and paste both lines
Interesting comments.

Here's the deal. Took my '98 GT 5 speed to my mechanic to have a
Speedcal, a new power-steering rack, and an intake installed. While my
mechanic had the car the fuel pump took a dump so I had him replace it
with a high-flowing pump[Steeda part # 555-3050]. My mechanic puts it

Our extended warranty company 1SourceAutoWarrantee (reinsurer is Primeguard)
went insolvent. We are looking for members for a class action suit and to
discuss ways of trying to recoup our losses. I started a Yahoo group. If you
can help or have been burned, post to ...

What units are easier to install, a wet or dry?
What units are recommended?
Thanks,
Nick

OK, for $35M they don't give you a cigarette lighter with your
Mustang.......got tired of looking at that cheap "power point" plug in
the dash, so ordered the smoker's set  ($98 for a plastic cup, lighter
and outlet to replace the powerpoint - since the crafty devils made it a

My 70 mustang 351W motor has roller rockers...I get a little valve
clatter for about 2 minutes when cold....then it goes away. The motor
runs strong...It has hydraulic lifters...Is this a lifter problem or a
roller rocker needing a slight adjustment? Is there a way to tell the

Are there states where NOS is illegal to have on the car?
I'm facing a tough decision right now on what car to buy.  I want
something thats comfortable.  High performance.  Easy to modify.
Plenty of aftermarket parts.

tried to change to a 65 mm throttlebody on my 86 stang and it does not
like it. idling bad rpm jumping and some backfiring smells like it
wants to run rich

I have an A/C unit from a 67 Mustang 289 that has been off the vehicle for 5
years. I no longer have the car and would like to sell these parts. I
believe I have all the components, brackets, hoses, etc. Located in Garland,
Texas.