Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Mustang / May 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
70 mustang wire harness question?31 May 2006 16:20 GMT1
I've got a mach 1 under the dash wire harness I want to clean up. Is
there a solution I can use to soak the harness?
GT500 & Corvette Duke It Out!31 May 2006 07:41 GMT12
Check out the new Car & Driver.
The new Shelby GT500 ran a disappointing 12.9 @ 112 mph.  Not really
any faster than the previous 4.6 Terminator Cobra.  (Hopefully we don't
have another '99 Cobra fiasco happening.)
Hoping for Good Gas News....30 May 2006 19:12 GMT63
Just received this...... granted this publication is focused on
investors, but we could sure use some good news....
Dear MoneyNews Reader,
Saudi Arabia's oil minister Ali al-Naimi is warning that oil price
P[Pontiac]MD Going RWD?30 May 2006 03:22 GMT2
Article with NoOp comments.
---
DETROIT -- After debating Pontiac's viability this year, General
Motors' leadership plans to revive the brand's heritage of performance
No Brakes30 May 2006 02:06 GMT9
I thought I knew how to replace brakes!
1972 mustang coupe
Brakes were working not great, but they stopped the car.
Replaced all  wheel cylenders, masterbrake, shoes, drums (4 wheel drum, no
Dodge Challenger Shows Up On Cruise Night29 May 2006 03:24 GMT6
Check out this note and the pics.  With Dodge playing the crowds how
far off can the Challenger be from production?
Look out, Mustang!
http://forums.focaljet.com/team-pit-stop/511945-fj-exclusive-one-off-dodge-chall
enger-rolls-cruise-night.html

Rev Limiter?27 May 2006 18:31 GMT4
Is there a rev limiter on my 6-cylinder 2000 Mustang?
When revving the engine, it seems to artificially stumble right around 4000
RPM, and won't rev any higher.  Since redline is quite a bit higher (5000?
I'm working from memory here) there seems to be some sort of a limiter at
8.8 disassembly27 May 2006 17:04 GMT8
If one only needed to change one singe alxe, what would be the
cheapest easiest procedure for swapping them?
My son decided to steal my wifes car, slamming into something and
shattering the rim, rotor, and bending the rim-mounting flange. I have
PING - Spike27 May 2006 14:36 GMT8
I heard through the grapevine that your Mustang is gonna be a star - when?
Dodge Challenger: A Go For 2008.5!27 May 2006 03:13 GMT57
Employees from DamilerChrysler supplier, Collins & Aikman told
NewAgeMuscleCars.com today that they are working on engineering certain
components for the upcoming production version of the Dodge Challenger.
Even though Chrysler has said that the decision to build the Challenger
Ford Truck questions told to ask you folks.....TIA27 May 2006 01:14 GMT19
Ok the skinny is I have this Ford truck (more details below) that I am told
(though I don't believe) that it has a 1972 Mustang 302 in it! So here are a
few details in a list form:
1978 Ford F-100 2 wd pick with a
Tire Pressure for '94 Cobra with tire option 255/45/1726 May 2006 19:23 GMT6
Does anyone have the Ford tire pressure spec for this tire size option on
the '94-'95 Cobra?
Thanks
Engine Dies '94 GT26 May 2006 19:20 GMT11
Today while driving slowly the car just died and wouldn't restart. After
about 15 minutes it started ok. Drove to my local garage to check. They
advise that no fault codes were evident and the car ran well for them. Later
on (a few hours later) I drove a few blocks and stopped for a ...
need a fuse box diagramm for my 96 4.6 GT conv26 May 2006 06:41 GMT1
If anyone would be kind enuff to send one. Let my daughter use my car and
the seat adj fuse blew. She took it upon herself to pull all the fuses which
are now sitting in a pile on the floor. Searched the net and couldnt find
one. no markings on the cover to help. Drivers seat is so ...
Qestion: 2005 Mustang v6 throttle body spacer25 May 2006 11:11 GMT1
I'm wondering, are these snake oil on an otherwise stock  vehicle or do
they actually give some extra HP? They look kinda nice but I don't see
wasting the money if it's just cosmetics
Thanks in advance
Pages: 1 2 3 4 5 6 April, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.