| Thread | Last Post | Replies |
|
| 2006 Mustang Convertible 2 questions? | 16 May 2006 11:14 GMT | 23 |
Can you drive with the top down and without the tonneau on, without damaging the top? At lower speeds? A highway speeds? The car doesn't yet have 1000 km (600 miles) on it. Will the mileage improve? ( V6 - 5 speed auto transmission) Yesterday we drove 300 km mostly
|
| Could someone with a 67-68 Fastback take one measurement and snap one picture? | 16 May 2006 06:45 GMT | 1 |
Almost done with the body here, except a few miscellaneous things. One is, somewhere along the lines, I cut out a 1" tall piece from the 'support' that goes from the trunk floor (about mid wheelwell) up to the roof.. I cut it out at the trunk floor to take out the trunk floors, ...
|
| where is the Vapor management valve on a 96 Mustang GT? | 15 May 2006 22:12 GMT | 2 |
Check engine light come on, OBD code read P1443... all in all I need to check/replace the Vapor management valve and am unsure as to where to find it. Aslo if I need to replace it where can I buy one Thanks, -uncwrat -- uncwrath
|
| 2004 mach 460 questions | 15 May 2006 02:53 GMT | 1 |
Looking for some help here! I have scoured the net and googled the group looking for info on upgading my deck. I just want to replace the stock setup with something with a front input, so I can use my ipod. Is this possible?
|
| Subframes? | 15 May 2006 02:17 GMT | 9 |
I have a 2001 GT on which I would like to install subframe connectors. All of the ones I have seen advertised are weld-on. I had a 5.0 previously, and it seems that in the early 90's, it was either weld-on or bolt-on. Does anyone know of any bolt-ons for the 99-04 cars?
|
| for sale 1991 FORD MUSTANG GT | 14 May 2006 13:22 GMT | 1 |
New motor and 5 speed tranny inspected till 3/07 bbk sorties and Off road H-pipe, e303 cam cobra heads runs and looks great, only needs some interior work to finish up . asking best offer over 3000.00 e-mail tugger07@localnet.com for questions and pics... thanks
|
| my dome light doesn't come on when i open the door or turn the knob | 13 May 2006 18:15 GMT | 3 |
hi. i was wondering if anyone could help me. i have a 1998 mustang. i recently noticed it was really dark when opening my car door and getting in. thats because my dome light is not turning on when i open the car door or when i turn the headlight knob all the way to the left.
|
| So this is my life...OT, and On Topic too... | 13 May 2006 06:34 GMT | 16 |
Well, good to be back, and I apologize for those who have contacted me. Things have been incredibly hellish over the last few months. The New Orleans thing turned into a huge fiasco, with non-desired results. My business has taken a lump in the form of a non-working partner. He has ...
|
| 1969 Mustang Bench Seats | 13 May 2006 02:53 GMT | 4 |
Anyone got pictures of a 1969 Mustang with a bench seat? I have a 69 Mustang I just bought and am interested in figuring out if the upholstery is how the original looked. The current seat looks like a "deluxe" seat that is often shown for the buckets, but my car tags
|
| Want more MPG? Trying using your clutch pedal. | 12 May 2006 17:37 GMT | 8 |
With 3-buck-a-gallon gas here to stay, I decided to see what I could do to lengthen the trips between my 35-plus-dollar fill-ups. My first thought was to reduce my highway speed. Well... traveling down the highway at 65 mph lasted about ten miles. Cars were whipping past me
|
| 3.0 ford ranger | 12 May 2006 17:03 GMT | 4 |
i cant find the spout connector so i can time my 93 ,,3.0 ranger...sure could use some advice
|
| Baby Needs a New Pair of Shoes | 12 May 2006 16:43 GMT | 10 |
I'm looking to give my mustang a new set of shoes. Its an '03 Pony. I live in Florida and have to deal with occasional sudden torrential rain. Yep - all at once. Nice eh? Anyhow, I'd like to put a tire on the car that help handling on wet
|
| Cooling Fan | 12 May 2006 15:22 GMT | 7 |
Just curious, I just bought a '90 LX 2.3L and the fan control is bypassed and the fan runs all the time.. would this cause the car to cool slowly? just curious before I replace the controller thanks, Terrance
|
| 9000 GT500s Will Be Produced | 12 May 2006 10:18 GMT | 13 |
(Dearborn, Michigan) TheGT500Source.com - Ford Motor Company today told dealers today that they will produce 9,000 2007 Shelby GT500 Mustangs. The production number is higher than the 7,500-8,500 range, which was anticipated. TheGT500Source.com spoke with Ford this morning and was
|
| where can i get a circuit breaker? | 12 May 2006 05:54 GMT | 2 |
Anyone know where I can buy a 6amp circuit breaker for wiper motor 1980's ? The dealer wants $29.. ouch... Thanks David
|