| Thread | Last Post | Replies |
|
| 2005 Mustang Fog Light Question | 23 Jun 2006 18:24 GMT | 3 |
I installed a GT front bumper, and grill with fog lights on my 6 cyl. 2005 Mustang. In a schematic of the wiring there is a note that if you want the light on the GT switch to work you have to run a jumper from dk/wh to bg/lg (?). First Question. On the GT switch does the fog light ...
|
| '67 289 Timing/Power Questions | 23 Jun 2006 02:02 GMT | 6 |
my 67 started running poorly all the sudden last week. It has 96K on it, replaced cap, rotor, plugs, wires last year. Still has points (I know this is on my list...). Had the Autolite 2100 carb rebuilt last year. Still seems to run rich, but generally runs well.
|
| 3.8 Engine Swap | 23 Jun 2006 01:46 GMT | 2 |
Hi, my name is Alek Pike and I have a 3.8L 1994 5-speed Mustang convertible. Before I bought the car, the car apparently blew a head gasket. I was not informed of this at the auction house where I bought it, and I have invested a fair amount of money in the Stang, almost to
|
| New GT500 Clicks Off 12.70s @ 116 mph | 22 Jun 2006 15:13 GMT | 28 |
After seeing disappointing track numbers for the GT500 in Car & Driver it was nice to see Motor Trend getting some respectable numbers for the 500 HP beast. M&T got:
|
| BIG Problem With 1996 4.6L Intake Manifold.................. | 22 Jun 2006 03:21 GMT | 1 |
My car's 4.6L engine had the famous junky intake manifold that leaked coolant. About 2 years ago I bought an aftermarket intake with the improved design and installed it myself. The intake fit perfectly and worked
|
| what should my oil pressure be? | 22 Jun 2006 02:39 GMT | 4 |
I have an 89 5.0 Mustang automatic, on my way home from work today my oil pressure gauge fell to zero. I changed the oil pressure sending unit and the pressure gauge went to about 30 psi at idle and dont rise much when I take off maybe 35psi. before the old sensor went bad it was
|
| Difference between pre 2005 and later? Purchasing advice needed! | 21 Jun 2006 12:41 GMT | 7 |
I am considering a 2005+ Mustang vert with a V6 or possibly a hard top GT. I can afford either the vert or the GT but not a GT Vert :( I have been scoping out the dealers and they seem to have no shortage of any of these cars which leads me to believe that price may be negotiable
|
| Does Ford have any E85 plans? | 21 Jun 2006 00:55 GMT | 4 |
Ethanol 85. Has anyone heard if Ford has plans to make vehicles in the near future that are E85 compatible?
|
| ceramic or kevlar pads for stock calipers. | 20 Jun 2006 07:28 GMT | 2 |
anyone know of a company that makes either kevlar or ceramic front pads for use in the stock calipers of a 1989 convertible lx 5.0?
|
| Kit to make the armrest lockable? | 19 Jun 2006 20:35 GMT | 3 |
I have a 2005. I love the armrest, lots of storage inside. I wish it were lockable.. has anyone ever seen a kit or maybe a replacement top with a lock in it? Thanks.
|
| OT, But You Gotta Love It! | 19 Jun 2006 16:30 GMT | 3 |
http://www.ronpatrickstuff.com/ Patrick
|
| Rear end swap | 19 Jun 2006 15:46 GMT | 2 |
I've got a 99 v-6 and I'd like to put an 8.8" limited slip rear end in. Would any Fox chassis rear work? Didn't Ford change mounting points for the 4 link at some point? Thanks for any help. DW
|
| Has anyone installed a Security Alarm | 19 Jun 2006 08:20 GMT | 3 |
Hi there Peoples: Well with an investment of a 06 Stang I'm looking into installing a security system the one I'm tilting towards is a " Crime Guard 745i4 " which has a motion sensor (this is a convertable) has anyone installed one of
|
| SN65 first mag article | 18 Jun 2006 16:17 GMT | 3 |
Featured in August issue
 Signature Yeh, I'm a Krusty old Geezer, putting up with my 'smartass' is the price you pay..DEAL with it!
|
| From Kate: If I were a guy ... | 18 Jun 2006 08:12 GMT | 3 |
I would have a woody! http://tinyurl.com/l7d8g My apologies for the link going to another forum. Now, if you'll excuse me, I have to wipe the drool off of.. well..
|