i just have another of my infrequent question you are so helpful with.
i am thinking of a resto-mod on a '68.
is there differences in the 86 - 93 5.0l motors in the mustangs?
do other cars have the same/similar motor/emc's?

Hi, a buddy of mine is giving me his engine, as he wrecked his old
Merkur. I'm looking to throw the turbocharged 2.3 L SOHC into my car,
and I'm not finding too much info on this project. If anyone's had any
experience with this, is there anything I should know about? From what

i am going to change the fluid for the 1st time in my 2000 GT.
i have a tremec t-45 and it appears the filler plug is a torx.
i will have to borrow or buy one, can anyone tell me what size torx
the fill plug is? i will probably buy a set, but want to make sure

Need to buy a gas cap for a ' 71 Mustang Grande'.
Will any gas cap work including ones labeled "emission control"
as these appear to have pressure seals.  The current gas cap
fits very loose.

I've always had a thing for the 87-93 fox body mustangs and I've always
wanted one with T-tops.  I've owned a 4cyl 89 hatchback, a 93 5.0 hatchback
suped all up, and more recently I owned a 88  5.0 lx convertible.  I thought
the convertible would be a good substitute for the ...

I have a 93 about 240 hp  5.0  (weight is about 2700)
If I get a 2006 V8 about 300 hp (weight at 3500)
Will the drive the same or the 2006 be more sluggish due to the weight ?

Can anyone recommend a manual for a 1971 Grande'.
The only original part of the car is the body.
Top Loader with Mach1 drive train which has been
modified.  351C which has also been modified.

The air cleaner reads 351 4V on my '71 Grande'.
This is confirmed by the fifth character in the vin  "M".
What does 4V represent?  If they meant 4 barrel, why
not say so.  Please be bear with me, this

Hey guys, I have a 01 Gt convertible that pings like crazy if I don't use
Super Unleaded (Exxon preferably) it pings under a load.anything else just
driving under a small load like accelerating it pings lightly. now I have
considered doing the water spray in the intake and seeing ...

so after finding out that my car has 4.56 gears in it (i just got it),
i did some online research. i found out that those gears are mostly for
big 4x4 trucks. having a 91 mustang gt 5.0 with 17 inch rims, is it
monitarily worth it to buy the 3.73 gears i hear so much about? and

Can anyone run the carfax for me for WAUBB28DXWA242767 ?
Thanks,
Chris

I have a 72 mach 1 Mustang with no Motor are transmission . I am buying
a junk yard 351c with C6 from a 1974 Cougar. I can't find a netural
safety switch on the Cougar transmission. Where should the switch be on
a 72 mustang C6 Tranny. Can this combination work?

I have a 93 GT with pretty low mileage (about 40,000 miles).
It's totally stock with a 5-spd and 2.73s. Oh, I do have an X-pipe, exhaust, subs, and timing bump. All the usual little things.
Today, it got pretty warm here (and being way up in the foothills of the Rockies where the ...

I have a '69 Mustang that I recently had to replace the driver side
floorpan.  With the uni-body design, it occured to me that some flex
probably occured when the old pan was cut out.  If I weld in subframe
connectors and the frame is not perfectly square, will I be doing more

I just purchases a used 91 Ford Mustang LX with 94,000 miles on it.
Everything seems to run fine on it except when I try to accelerate at
any other speed except "grandma". When I step on the gas coming from an
idle the car either "jumps" forward receiving gas and then not and then