| Thread | Last Post | Replies |
|
| Stolen 66 convertible | 27 Jul 2006 04:31 GMT | 6 |
Sacramento Police department is looking for the owner of a 66 Mustang convertible, black top and blue body, which was stolen and they have recovered. Anybody out there missing a car?
|
| 2005 Mustang Dash Removal | 27 Jul 2006 03:04 GMT | 3 |
I need to install a FM Modulator behind the radio. Anyone able to lend some pointers on removing the dash to gain access? I had a helluva time on my 2000 mustang and want to avoid that fiasco with this car. Thanks in advance,
|
| Two Questions about a 72 Mach 1 | 26 Jul 2006 14:21 GMT | 3 |
Hi Group, I'm restoring a 72 Mach 1 which has a urethane front bumper. I'm having a very difficult time trying to get the big phillips screws out of the bottom of the bumper so the I can remove it. I've tried PB Blaster, but no luck so
|
| 91 2.3L won't start | 26 Jul 2006 13:45 GMT | 2 |
My 91 2.3L mustang quit starting last night. It was running fine until I stopped by a friends house. When I was parking I did a pretty good curb check that jostled the car a bit, but didn't think it was a big deal. Go out to start the car and get some clicking then nothing. I had
|
| Spitting Noise When Accelerating | 26 Jul 2006 06:54 GMT | 1 |
I'm still driving my '95 GT convertible after 10 years. Now I'm getting some issues when accelerating. As the RPMs go up, I hear a "spitting" noise and the "Check Engine" light comes on. Before I take it to a mechanic, I was hoping for some insight into what
|
| restoration question | 26 Jul 2006 05:04 GMT | 2 |
i have a 91 mustang gt. it was being stripped down for drag racing, i want to restore the vehicle to some more functionality. i found a center console at a local junkyare but it is on a convertible of the same year. will it fit? will i have to rig it?
|
| New Mustang owner has question | 26 Jul 2006 04:07 GMT | 20 |
This being my first Mustang and first Ford for that matter, let me address a simple issue for starters like tire pressure. The door numbers probably don't mean much since the car has been modified. It is a '71 Grande with a 351C, Top Loader tran and Mach1
|
| GT500 | 25 Jul 2006 21:18 GMT | 3 |
So, I am driving to work this morning and I see, 'mustang legend lives' on a flashing sign up ahead. I get to where the sign is and I see a 2007 Shelby GT500 in red with white stripes on the lot.
|
| plea for help | 25 Jul 2006 20:35 GMT | 1 |
Hey everyone! I am hoping to get some assistance to finish a college course. I need to get a hold of the moderator and can't find an email for him/her. If anyone could help, I would greatly appreciate it. Please don't take this poorly, I am not trying to quote or even mention
|
| 1992 Mustang LX 5.0 - Transmission Slipping | 25 Jul 2006 13:26 GMT | 8 |
Here goes... On the way to work today all of a sudden she wouldn't go over 40 MPH. The RPMs were climbing but nothing over 40. Was occasionally able to coax her over 40 MPH.
|
| what would you do... | 25 Jul 2006 07:08 GMT | 4 |
I bought a FRPP ignition wire set off eBay. I paid for the item instantly when the auction ended, but the seller didn't ship it until 10 days later. I eventually got the wires and they were fine. But today I got a "gentle reminder" email from the seller to "please leave
|
| Mach 460 CD changer crapps out... What to do ??? | 25 Jul 2006 02:44 GMT | 3 |
Hiya all... My CD changer in my 2001 GT's Mach 460 system just crapped out :( The radio still works fine, but all the CD's are stuck in the changer. They wont play or eject. I just get "CD ERROR"
|
| Visit to the Ford Dealer | 24 Jul 2006 20:45 GMT | 32 |
I was having some work done on my car so I walked around the Ford dealership looking at cars. A salesman greeted me. I asked if they had and new GT500's yet. He said no, but they were getting four. He said it looked like they would
|
| 67 mustang power steering question | 24 Jul 2006 17:31 GMT | 3 |
I dropped a 351C in my 67 and my wife thinks we should put the p/s back in it. I've been trying to find a pressure hose that will work, but so far no luck. The hose that was on the 302 won't clear the oil filter, motor mount etc. I've had some tell me they run up by the shock ...
|
| door lock busted. actuator? | 24 Jul 2006 17:01 GMT | 7 |
Hey, all. Not sure what is going on here. One day I was unable to unlock the drivers door of my '89 using the outside keylock. I came in through the passenger side and used the drivers door release to open the door.
|