Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Mustang / July 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
info on converting to E85?06 Jul 2006 20:40 GMT7
Hi gang -
Wondering if anyone has heard of someone converting a Mustang so that it can
run E85?
There are plans to open up a station near my house that distributes Ethanol
The dangers of the road06 Jul 2006 19:59 GMT19
Now start JAILING these people just like drunks..
Three years after the preliminary results first were presented at a
scientific meeting and drew wide attention, University of Utah
psychologists have published a study showing that motorists who talk on
Emergency brake COIL spring on CALIPERhelp06 Jul 2006 16:51 GMT1
i made the mistake of thinking that the bolt holding one side of the
coil spring used on the emergency brake lever on the caliper was
preloading the spring so i took it out. oops. does anybody have a
trick to get that coil return spring back on? i already ripped the
SPARK PLUGS???06 Jul 2006 16:48 GMT7
I sure feel stupid asking this question but here it is. I have a 2001 GT
with 81 thousand miles on it. I want to install a new set of spark plugs
but where the hell are they located??? Is it a major job to get at all
of the plugs??? Should I go to the dealer and pay $$$ instead of ...
And What Would You Buy?06 Jul 2006 11:25 GMT27
Here are my options:
2005/2006 USED/New V6 Vert....
2005/2006 USED/New GT
(No way I can go used/new 2005+ GT+Vert...)
05 Mustang Brake squeal05 Jul 2006 18:52 GMT1
I need some advice on getting rid of brake squeal. My 05 started
squealing when it
had about 5k miles on it. I replaced the stock pads with Ceramic Hawk
performance
Air conditioning plumbing schematic05 Jul 2006 18:22 GMT2
I need to charge my A/C on my 03 Mustang GT V8.  I cannot figure out
which valve is which.  Does anyone have a picture of the plumbing
and/or notations about the valve locations??
Back To Back GT vs V6 Test Drive.......05 Jul 2006 11:56 GMT5
Alright, so I am yet another future Mustang owner that is going through
the same quandary: V8 or V6 or rag top+ V6...
I am also a confirmed GM man, at least up until now <grin!>
So I went to the dealer and drove both the V6 and a V8 GT(ragtop).
A/C and Vent blowing out of defroster05 Jul 2006 01:34 GMT3
I've got a 1994 Mustang 3.8 and when I turn on the A/C or Vent, the air
blows out where the defroster air should blow (top of dash on
windshield).   The defroster works fine, and the heater blows out on
the floor, but I can't get air to blow out the vents where the A/C
89 Mustang 5.0 fuel pump noisy05 Jul 2006 01:12 GMT7
Hi - I just bought a very stock 5.0 LX convertible that has been
sitting for about a year before I bought it - everything is fine except
that I notice that the fuel pump is noisy all the time - it makes a low
buzzing noise all the time that reminds me of the seat belt warning
I put an Optima red top in my Fox04 Jul 2006 15:40 GMT3
For anyone who has wanted to put an Optima battery in their fox car,
but was disappointed when their web site make/model lookup announced
"we do not make a battery to fit your car."  I can tell you, the 34/78
size red top fits perfectly in my 93 GT (don't know about 94-up or
'94 Trunk Lid Bumper04 Jul 2006 14:30 GMT4
Anyone know what to use to replace the rubber part of the trunk lid bumper
(the springs mounted on the trunk lid that act as shock absorbers) on the
SN95 series Stang?  The rubber on my bumpers has dried and crumbled into
dust...
How do I :Cyl balance test on a '00 GT. 04 Jul 2006 11:26 GMT1
I would like to do a cylinder balance test on my Mustang GT.
A. How do I get it into the test mode.
B. Does the 4.6 L engine have a cyl balance test ?
THX
67 mustang wheel cylinder size04 Jul 2006 11:18 GMT3
Does anyone know the size of the wheel cylinders on standard  rear drums?
Thanks
Crack in canvas top in '88 Mustang03 Jul 2006 22:27 GMT7
Hey all!  Back in Feb I bought a sweet 88 5.0 Lx.  I drive it once a week or
so and now that its summer I've been putting the top down of course.  The
top is a couple years old and back towards the back of the top but before it
slants down to the window there is a small crack in ...
Pages: 1 2 3 4 5 6 7 8 June, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.