I recently aquired a 1999 mustang..I need to replace the right outside
power mirrow.Do I have to remove the door paneling to change the
mirrow?.Jimmy...TIA

'86 LX Hatchback, 3.8
My air conditioning went almost overnight from cooling adequately to blowing
hot air.  The clutch was cycling on and off at about two second intervals.
I found that the high side schrader valve was leaking so I took it in to get

99 Mustang, 60K miles, V6.
Every couple days, driving along,  car starts starts to sputter, RPMs
drop, then fuel pump fuse blows.
Trying to rule everything out before replacing fuel pump.

I have a 1990 Mustang GT and I recently took it in to have the heater
core replaced (worst labor rip off ever, 9 hours) and when I got my car
back, all of a sudden the turn signals and the fan/air conditioning has
stopped working.  At first I though, oh they just blew a fuse and

An interesting interview...
---
The Mustang Source recently had the opportunity to interview John
Coletti who lead the skunkworks that saved Mustang from

Enjoy Group!

I have a 1990 Mustang GT and I recently took it in to have the heater
core replaced (worst labor ever, 9 hours) and when I got my car
back, all of a sudden the turn signals and the fan/air conditioning has
stopped working.  At first I though, oh they just blew a fuse and

The GM plant in Ontario will (instead of being closed) produce the new
Camaro, saving approximately 2700 jobs though they will lose some of
the total number now employed.
Ford's 20% production reduction is likely to mean the layoff (perhaps

I just recently bought a 1968 mustang coupe with a straight six. When I
bought it, it had been sitting for about a year. After driving it for
about ten minutes it began to sputter like it wasn't getting enough
gas. It ran for about thirty minutes and then it died on me and I had

...to go into my 98 gt.  I don't know much about engines so - besides
the heads, block, and intake - what will I need to complete a 4V?  I
know that some parts will migrate from my existing 2V engine but need
to know what is needed in addition.  Thanks

8/25/06
(Reuters) Ford Motor Co. is in talks to sell some luxury-auto brands to an
investment group led by its former Chief Executive Officer Jacques Nasser,
Bloomberg news service reported on its Web site, citing four people familiar

Liked the "281 3 valve" emblem.
Al

i see you bought the general exclaim UPT.
i was wondering how they handle. i don't spin my tires, but i corner
hard. is the sidewall as stiff as gatorbacks, or does the sidewall
give more and feel squirrelly? do they hold a hard corner or slide?

I saw a ground up restoratation book for 65s at a bookstore years ago, but
I cannot find it now.
Any recomendations? Thanks, L.

This groups been good to me. Good answers for good questions. Ive got a
69 351w that Ive done the top end on with edelbrock performer parts.
Ive now got an 89 GT 5spd that im not intimate with engine wise. And I
wanna get serious practicle power from. It would be a daily driver when