Has anyone seen this?
Is this a 2007 Shelby going into the wall???
LMAO
Brad

I have small bearing 9" with 3.00 gears, an open diff and 28 spline
axles. Its under my 66 stang, I dont have a high horsepower engine but
I really need to get some traction. But I was wondering how strong the
small bearing housings are? Would be a waste to put money into to this

I am in need of a new transmission (auto) since the transfer case on my
old one has been wearing down and has spit metal flakes all into my
tranny and completely wore it down beyond repair.  I took it to my
local tranny shop and they had to take it apart to find out what was

I installed natural gas (Liquid petrol gas) on my 3.8 Ford Mustang from 95.
It is working fine except it occasionally backfires and blows up the mass
air flox box. I replaced it several times and still the same. Does anyone
know how to fix the problem ? Is the plastic box is too ...

Last year I put my name on a waiting list for a GT500
with an out of town dealer. I was number nine on the list.
I figured if I could get a brand new reliable Mustang with
500 hp for around 45K I might go for it. After several inquiries

Been a very long time since I came here for help but I need some advice.
This all started about two years ago.  The local SUNOCO station had a
mechanic that was there for years.  He always took really good care of
my car.  

Wanna see your car in our page? send us your pics with descriptions and
details?
webmaster@cool-cars.name
http://www.cool-cars.name

I'm looking at a 1965 ivy green mustang conv. Since it is a big
investment for me I'd like a get some helpful feedback. It does not
have a power top, but does have a/c & pb & ps. Is it a waste to pay a
premium for the AC feature in a convertible? Does the non powr top hurt

I'm looking at the fender on the passenger side.  I'm looking at the
antenna.  I'm thinking, "something ain't right."  Do I have to take the
fender off to install the antenna?  Please advise.

Help !!!
I just bought a new Mustang GT. It has the Shaker 500 Audio System. I
have not been able to find any helpful info on the system. The owners
manual is useless. I would like to know where the auxilary input is

I have finally joined the Stang Club, I'm an Ex-Camaro nut. I have no idea
why I waited so long to switch over!
I picked up bone stock 5 speed with 40kms. I would like more sound out of
the exhaust. It was recommended by someone to add a professional intake

I just saw the '67 from a few posts ago with the 17 inch wheels.  I don't
think it looks too bad.  What would it take to put a set of those GT wheels
on my '71?   Do you have to use a spacer to move the wheel out past the
upper control arm?   Saleen is advertising a set for $374.

Hi .. I bought a rebuilt 351w from a guy that swore that it would
fit in my mustang. (67)
But I have two big problems.
1st is the sump hump on the pan runs into the steering linkage and

We've got a 2000 Mustang convertible that a previous owner spent too
much money on making into a "Cobra clone", with the enhanced
suspension, wheels, exhaust, and cosmetic stuff.  We bought it because
we wanted a nice convertible Mustang, and all that other stuff was just