| Thread | Last Post | Replies |
|
| www.masterpowerllc.com | 22 Feb 2007 17:19 GMT | 1 |
Master Power has been the leading manufacturer of top quality performance products for classic muscle cars, street rods and pickups for over 20 years. You'll find an extensive product line of innovative, reliable brake and suspension products carefully
|
| Mustang Computer in Lincoln | 21 Feb 2007 19:26 GMT | 12 |
What will happen if I put a 97 Mustang Computer in a 97 Lincoln, since they basically have the same engines.
|
| Can a Mustang do a wheelie? | 21 Feb 2007 01:47 GMT | 1 |
http://www.youtube.com/watch?v=90Snlp7iFNA&mode=user&search
|
| Suggestions on new clutch needed | 21 Feb 2007 01:23 GMT | 1 |
Have a '71 Grande with M-code 351C-4V. Has a toploader with 9" rear end from a Mach 1. Someone suggested a CenterForce. Any comments? mike
|
| Ping: Patrick | 20 Feb 2007 23:11 GMT | 7 |
Questions: At the drags yesterday I kept a close eye on two newer GT's. One automatic, one 5 speed. Both appeared stock, but I did not see under the hoods. Both ran low 16's. (We're at 3075 feet elevation.) If you had a newer GT, and you just floored it in drive, shouldn't it run ...
|
| Shelby Motorcycle | 20 Feb 2007 16:47 GMT | 2 |
February 8, 2007 Carroll Shelby International and Rucker Performance unveiled a limited production Shelby motorcycle at the Cincinnati V-Twin Expo last week. The high performance motorcycle was developed in partnership between the two companies and will be built by Rucker
|
| any nice bolt on turbo kits for 60's V8 mustangs? | 20 Feb 2007 13:22 GMT | 2 |
I tried searching onlline to no avail. Wife has a 66 Mustang, with the 289 V8. I would like to know if there is a ready made turbo / twin turbo kit available from somewhere.
|
| Way OT: New Pontiac G8 Your Thoughts? | 19 Feb 2007 17:53 GMT | 45 |
Take a look folks. http://www.gminsidenews.com/forums/showthread.php?p=918063#post918063 What's your thoughts? Does GM have a future hit in the wings? Will the G8 cut into Chrysler's 300/Magnum/Charger sales? Will GM start
|
| The Big 2-1/2 ? | 19 Feb 2007 17:47 GMT | 12 |
Looks like GM is considering buying "C" from from "DC". Makes me wonder what chassis will GM use for the 300C, Crossfire etc. if the sale goes through. Here's a link: http://tinyurl.com/2m5lsq
|
| 72 Mach 1 leaking gas | 19 Feb 2007 16:20 GMT | 11 |
I bought a beat up 72 Mach 1 a couple weeks ago (my first project car) and probably bit off more than I can chew. I filled it up with gas yesterday, and this morning noticed it dripping gas from where the gas line comes out of the gas tank. Looks like there's an elbow coming out
|
| 1983 mustang v6 | 19 Feb 2007 04:30 GMT | 6 |
my girlfriends car is a 1983 mustang auto in really nice shape except for a few problems like just quits running even on the highway what should i look at ???
|
| ? About Remote Start - 2002 Mustang Coupe 3.8L Automatic | 19 Feb 2007 02:04 GMT | 4 |
Thanks for any help you can provide. I just bought a 2002 Coupe 3.8L Automatic. The guy who sold it to me had a remote start installed, it seems to work just fine. But he could only give me one key, he said the other one was used for the remote start. I asked him if I could
|
| Carfax on a Mustang? | 18 Feb 2007 07:39 GMT | 2 |
Does anyone have a current Carfax account? Im looking at this Mustang, 1FACP41M2PF173579, and would like to get some info on it. My email address is fiveofun@hotmail.com if someone could run a report for me. I appreciate it.
|
| update on problems with my 98 cobra | 18 Feb 2007 05:55 GMT | 2 |
I had posted earlier in the month about my 98 cobra running for about 5 minutes then quitting. I have replaced the fuel filter, and the idle control valve, and wired my fuel pump straight up to keep running and car still died but the pump still worked. Please help me figure out what ...
|
| "SUDDEN ACCELERATION" 'aint going away........ | 18 Feb 2007 03:24 GMT | 23 |
http://www.autosafety.org/article.php?scid=173&did=907
|