Here is the problem. Blew top radiator hose the other day, replaced it
and all was well then the radiator started leaking. Put Barsleak in it and
it sealed ok. Today the Bars let loose (I hate that sh.t but my gf was told
by one of the "knowledgeable" people at Kragen that its ...

Recently adjusted the mixture screws on my Carter AFB
using a tach.  Back out the screws until the RPM no longer
increases.  Have heard a better way is by using a vacuum gauge.
Turn in the screws (more lean) until the vacuum just drops a little.

http://www.blueovalnews.com/index.php?categoryid=12&p2_articleid=471
$600K for new Shelby GT?  A car you can go to the dealer and buy for
under $40K.  (Please don't wind me up any further with it's serial
#1.)  WTF?!?  Is BJ drugging these people?  Because these people have

I have a 70 mach1 mustang with a new front suspension and steering
components. I have 620 coil springs. I want to lower the A arms
1".....will this lower the car body 1"? Someone told me that the car
would only be lowered a 1/4" Has anyone done this with a 70 mustang?

building a 67 fast back is there more then one place to put an oil
sending unit

I had a 302 and a 4 speed in my 1973 Mustang Mach 1 but I'm looking
for a new engine and figured I might as well get a new transmission
while I'm replacing everything. I'm looking for a 302, 351, cobra jet,
boss, 429, anything thatll fit really. Does anyone know where I can

Which names have clanked the loudest into car history's wastebasket?
These are TheCarConnection's 15 contenders:
Ford Probe
In a single stroke, Ford managed to alienate half the potential buyers