I found a 1970 Cougar carcass with a tach dash. I took the tach and
have jerry-rigged it to my '70 Mustang's instrument cluster. Looks
good with the white face overlay. I've grounded the back of the tach
to the car's chassis and have run one of the two leads to my ignition

Want to purchase a Demon carb and they want the weight of the car.
What does a 1971 Mustang Grande with 351C 4V and toploader weigh?
Can't find it in the manuals.
mike

top needs replacing.  can't find info on replacing it.  i can order all
kinds of tops, but they don't supply the information needed.  i'm sure
that i have more than enough tools, so that is not the problem.  
i called ford and was told that everything now is in the computer and

Ok... realize not everyone is into flames...
http://www.v6john.com/Main/Appearance/MRT_Airbrush/airbrush.htm
john

Rebuilding a "90 seven-up" Mustang and the original swaybar measures 33mm
(1.291) but everyone shows an 1 1/4 or an 1 5/16 for new frame bushings.
What size is it?? One guy says go bigger and put teflon tape in it?? and
another guys says go smaller??...but it is sure going to be ...

I guess it's both bad and good news...
http://tinyurl.com/ypofdq

I had a truck with trailer hitch back into me in a
parking lot, assume it was a hitch from  the
dimple it left.
Am wondering if this can be repaired without

What is the mileage interval for changing
Transmission Fluid
Have a 2003 Mustang, manual shift and was advised
by the dealer today when in for 28000 mile oil

I have a '72 Mach 1 which at some point in it's life had the
engine(and perhaps transmission) replaced with a 302. I noticed some
dripping under the car, so when I went under I saw drops of oil where
the driveshaft goes into the transmission. The oilpan seems to be dry

1989 - Ford Mustang V8.  For the last 2 weeks I have had a problem
with starting my car.  I start it between 7:30 and 8:00 in the
morning.  Four times in the past two weeks it has not started.  After
about 45 minutes to an hour it will start.  I have not had a lot of

i have a 1995 ford mustang 5.0 5 speed and it will not stay cranked
replaced coil.computer,distributer and checked alternator and starter
still will not sta cranked

WF and the Froggenator have never heard of Master Power Brakes? What
planet have you guys been on for tha last two decades? They have full
page ads in many of the trade magazines and constantly come out with
new stuff. Finally you get spammed by an ON Topic company and it's

http://www.msnbc.msn.com/id/17472505/
Might be a good time to do some wheeling and dealing with your local
dealer.
Patrick

My ultimate dream car has finally been built.
Simply incredible!  You must view this car!
http://youtube.com/watch?v=WaWoo82zNUA
Patrick

WEll well.. I buy a OBDII scanner and I getr these codes
708
720
743