Does anyone have access to a flat rate manual?
I want to put cross drilled rotors on the front of my mustang.
2006 GT Coupe, I got a quote of 4 1/2 hours. This seems a
high quote to me. Just a labor quote.

I used to go to this site all the time and now I cant remember what it
was called and it bugs me. It was a parts place in pennsylvania , i
think, and they had pics of events they had, they had a "babe of the
month" for awhile but it wasnt updated very much. I think they had a

The clear plastic lenses on my 2000 convertible are starting to look
like they've been sand-blasted.   My shop tells me that this is a
common problem with Mustangs -- Ford used cheap plastic in the
headlights that degrades badly over time.

Does anyone know if it's OK to apply Bondo® over POR 15®?
I'm doing some minor repairs under the front fenders on the "inner fenders"
(apron), that mostly won't show.
Thanks,

In the 1968 movie “Bullitt”, maverick cop Steve McQueen was reall
cool hunting down criminals in his Mustang, that the folks at For
created the 2008 Bullitt Mustang in honor of the movie’s 40th yea
anniversary.

I am in need of decoding the vin for this car,  I have been able to
find other vehciles in the past, but am unable to find this one.  VIN
# 0T05H157079

i need a replacement on my 03 mach 1. i called my local dealer today. he
can get me 1 for 95.00. i asked if it had the black plastic ring on it,
he said he did not know. has anyone here ordered a replacement from
ford? its the ring that goes around the cut out part of the liner. i

I need to replace my driver's seat as the frame is gone and have a line
on a pair of 69 buckets with headrests which would be preferable to the
low-back buckets the 65s came with. I seem to recall that they are
interchangeable, the seat platforms being the same for 1965 thru to

Replacing the OEM spark plugs in my 98 f-150 4.6.I pulled #1 plug and it
was a AWSF-32PG.What is the correct motorcraft Part # for the
replacements?

I got the old, ratty one out of the '66. How the hell do you get the new,
spiffy one in?
Dang...

Want to replace the front shocks on my '71 Grande M-code.
Would stock shocks fit the bill or should I spring for Koni
or Bilstein?  The car is a daily driver with occasional trips
to the mountains were I push the car a bit :)

Anyone have an easy way to get the poly bushings on a rear P-S-T sway
bar?
The p-s-t bar flares at the end for the link to attach...    
                          ___

To reduce costs, automaker plans to trim buildable choices on 2007
Ford Mustang V-6.
Bryce G. Hoffman / The Detroit News
Given engine choices, interior trim level choices, color choices and

Is there an anti-knock sensor on the '94 Mustang GT? I'm guessing there
isn't but wanted confirmation. If there is, where is it located?

It has no spark out of the coil