Brad Pitt On the Role of Lt Frank Bullitt
Jul 9, 2007
Brad Pitt will star in a remake of 60s classic movie 'Bullitt'.
The actor will take the role of Lt Frank Bullitt made famous by

I knew it was just a mater of time before some nut job(s) made this
suggestion.  What's next?  We will be executed on the spot for farting
green houses gases?  Here's the article:
"Cutting CO2 or a Sneak Attack on Porsche, Ferrari?

Anyone ever tried those clear plastic things you put on the hood and
headlights to prevent paint chips?
Any sources?
Pre cut?  Bulk?

I have a 1970 Mach 1  351W that until today was running like a top.
It died at a stop light and I couldn't get it started. I had to have it
towed home.
I since put on a new coil, an old voltage regulator ( that was working when

 Classic Mustang here in OKC shows a listing for a Fiberglass spoiler and a
'High Impact' plastic.  They show the plastic to be for fastbacks and the
Boss 351, the fiberglass is listed for 6 cyl and 8 cyl.  Any reason to pick
one over the other?   This will go on a daily driver 71 ...

Last night on the way home the intake split wide open. I've done some
research and it seems there was a class action suit about this but the
deadline was 14 months ago. Anyone know if there is another avenue I can
pursue? This car has been a pain since I got it and if it wasn't ...

I haven't had a stang in a few years.. had a '93 Cobra I sold a few years
back.  So I am considering trading my car in for a newer GT.
I've been out looking and have got the "bug".
How is the handling with the tires & rims that all GT's come equipped with?

1993 5.0.  Seems to go a bit slower at WOT than 90% throttle.  Any thoughts
guys?
Thank you.
Brad

I almost hate to part with it. It has been such a sweet ride for 7 years.
But with a Shelby GT 500 on the way to my dealer, I need to say Farewell.
Here are the details:
2000 Mustang GT

I have a V6 automatic and was wondering how do you remove the center
console. The only thing I figured out is that the cup holders can be
pulled out by hand. I cant see any screws or clips that would keep the
console in place.

Today we took this car on a tour of the southern mountains and foothills
 of North Carolina and noticed something strange with the air
conditioner.  When I pressed on the gas while going up hill the air was
blowing cold but when I let off the gas coming down the hills the air

I need the nylon cam between the automatic choke and the carburetor body on
an Autolite 4100 double pumper (C4AF-R).  It keeps "fast idle" engaged until
the spring in the automatic choke elongates enough to push it onto "slow
idle".  The nylon cam is tapped for an adjustment screw ...

radio has power,
but when you turn it on, it has sound for about 5 to 10 seconds then goes
quiet all channels
One time it fixed itself, then it started doing it again.

One of my buds dropped a 1993 Mustang 302 into his 1966 Mustang and is
looking for a harness or wiring digram to use the 1993 alterenator with the
bulit in regulator. Can anyone here help with info on eather?
Thanks in advance.

AutoWeek | Updated: 07/03/07, 11:34 am et
DETROIT - Ford Motor Co. plans to increase fuel economy by rolling out
what it calls "twin-force" technology, consisting of two turbochargers
on four-cylinder, V-6 and V-8 gasoline engines.