| Thread | Last Post | Replies |
|
| Carb choice | 05 Oct 2007 03:46 GMT | 1 |
Have a '71 Mustang Grande' with 351C 4V. Car needs a new carb. Toploader and 9" rear included. My choices are a Holley Street Avenger, Edelbrock Thunder AVS or BG Demon.
|
| One BBL Carburetor Runs Rough at Idle | 05 Oct 2007 00:20 GMT | 14 |
My Friend has a 1965 Mustang 6 Cyl. He's on his fifth rebuilt carburetor. The current one is slightly better than the rest, but still rough.
|
| Depressurize Fuel System | 04 Oct 2007 18:33 GMT | 5 |
I am currently working on my third Fox Body, an 89 LX 5.0 Convertible. Just as a preventative, I wanted to change my fuel filter and ran into a problem. On my earlier ones (92 and 93), you could depressurize the fuel system by removing the fuse for the fuel
|
| Improves Engine Performance | 04 Oct 2007 03:25 GMT | 27 |
Your local gas station probably offers you 3 levels of gasoline, like gold, silver and bronze. These typically have different levels of octane in them and you will generally get a little better mileage for the more expensive type.
|
| Performance Mufflers for 07 Mustang GT | 03 Oct 2007 17:38 GMT | 3 |
I am contemplating replacing the stock mufflers on my 07 Mustang GT. I am not really looking at trying to bump up the HP, I just want to get a nice rumble out of the car. Also, does replacing the mufflers with any aftermarket muffler require a computer reflash?
|
| unknown model | 02 Oct 2007 16:14 GMT | 20 |
Is this Mustang and which model? http://www.mirkobeovic.com/slike/razno/Rcmj.jpg THX
|
| Moving oil pressure gauge | 02 Oct 2007 04:13 GMT | 9 |
Hi all. I just purchased a 93 Cobra. Needless to say, I'm in love. In addition to the usual Ford mods, the last owner put a C&L TB on it, K&N, fuel pressure indicator, headers, no cats, new exhaust. But my question is, the oil pressure gauge moves. Always in the safe zone,
|
| Fog Lamps | 02 Oct 2007 04:12 GMT | 19 |
Hello all, I was wondering if there is a way to make the fog lights come on with the high beams? I have read threads on the mustang sites but they all seem to be way over complicated. Does anyone know how to make this happen? Thanks Brian
|
| K&N filter Q and a few others | 02 Oct 2007 00:40 GMT | 10 |
Just bought a 93 Mustang with one - the conical ones inside the engine bay. Looks bigtime dirty. How do I clean it? Also, the doors squeek something fierce. A little silicon lube does the trick but once it drips off, it's back. Grease would work better I assume.
|
| Slimy cops and politicians SALIVATE at the money grab | 01 Oct 2007 19:09 GMT | 9 |
Legislation stripping speeders of driving privileges to take effect on Sunday Legislation that will see speeding and aggressive Ontario drivers temporarily stripped of their driving privileges will take effect on
|