| Thread | Last Post | Replies |
|
| Patience is a virtue...so is stubbornness! A GT500 at last. (kinda long) | 31 Dec 2007 19:48 GMT | 13 |
Whew! As The Greatful Dead so eloquently stated...what a long strange trip it's been. My quest for one of these cars has finally come to a close. I began looking as soon as the '07's started to hit the lots. I was certain the hoopla would die
|
| On Craigslist | 31 Dec 2007 01:17 GMT | 1 |
Saw this car run here at Pinks. Even commented on it here. http://tucson.craigslist.org/car/511555879.html It's NOT mine and I don't know anything about it, except it's a real sleeper.
|
| mustang replacement molding question | 30 Dec 2007 20:58 GMT | 3 |
Does anyone know of a manufacturer for classic mustang molding that uses quality metals instead of that cheap, soft, ill fitting crap that Corvex puts out?
|
| ACT/ECT sensors | 30 Dec 2007 12:15 GMT | 3 |
Replaced these sensors today on the 90 stang.Feels like I gained back 25 HP!I also disconnected battery terminal and went back up to a Mr Gasket 195 t-stat from a 180. In order to run regular gas again timing reset to 11 degrees.runs better now than before with timing advanced and ...
|
| Value of a 71 with 351C 4Vcarb?? | 30 Dec 2007 06:15 GMT | 4 |
I just found out my Uncle still has his 1971 Mustang with a 351C four barrel engine and automatic trans. He bought it new in 71. It's been garaged all it's life and only has 64K original miles on it. He's 89 years old and still driving. How much would this be worth?
|
| Back lighted intrument panel | 29 Dec 2007 03:51 GMT | 3 |
Does anyone know if a backlighted instrumnet panel is available for the first gen Fox Mustangs?
|
| Sick of Valvoline Oil Change | 28 Dec 2007 23:51 GMT | 13 |
I don't have the room to do my own oil changes, so I went to Valvoline's Jiffylube knockoff. I asked for oil and a new oil filter. The guy seemed insulted and said they always include the filter. He then proceeded to inspect all over my car and suggest stuff for me to buy. I ...
|
| Mustang Guy Scores Again | 28 Dec 2007 03:56 GMT | 7 |
I gave Tim -- a.k.a. Mustang Guy -- a call about a week ago and told him I needed a new processor for my Cobra. He had what I wanted in stock, and had it in my hands in less than a week. As always, his care doesn't end with just locating the item and prompt shipment. The
|
| KITT Cuts Loose | 27 Dec 2007 02:16 GMT | 3 |
A nice video of the KITT car horsing around... and the babe in the video is a bonus. http://jalopnik.com/cars/knight-rider/first-video-of-knight-riders-kitt-revealed -live-333192.php?autoplay=true Patrick
|
| 89 HO smell gasoline | 27 Dec 2007 01:59 GMT | 7 |
I have a 1989 Mustang GT vert. Lately, when I shut off the engine, I can smell a strong gasoline odor. I don't see anything leaking to the floor. Any suggestions on what I should look at? Thanks.
|
| 2010 Mustang | 27 Dec 2007 01:52 GMT | 13 |
http://jalopnik.com/search/2010%20mustang/
|
| Looking for engine advice for my 73 convertible | 26 Dec 2007 15:33 GMT | 7 |
This summer I purchased a 1973 Mustang convertible. The car is equiped with a 302 and automatic suspension. I would like to have the engine either rebuilt or replaced this spring. Being a convertible, i'm not looking to drag race the car or anything like that, but i'd
|
| 1-year-warranty and fully refund | 25 Dec 2007 13:40 GMT | 1 |
Merry Christmas! this is the last day for our $40 us HID Kit promotion. our HID comes with 1-year-warranty and fully refund. if it is the right thing that you are looking for, please hurry up to our website at www.housinghouse.com.
|
| Tire Pressure | 25 Dec 2007 04:12 GMT | 5 |
I have a 2004 Mustang with the V6 that came with the 16 inch wheels. Along the way someone changed out the wheels for 17 inch. The tire size is now 245/45 ZR 17/99W. Does anyone have any suggestions on what would be a good tire pressure to use with this tire / wheel ...
|
| New Vette has HP:) | 24 Dec 2007 19:35 GMT | 14 |
http://money.cnn.com/galleries/2007/autos/0712/gallery.corvette_zr1//index.html
|