This is a continuation of a previous post but I still have not come up
with a solution.
I still can't seem to figure out why my brake pads won't fit my SVO
73mm steel piston calipers that i bought from 50resto.com who have

It's a land of free choice.  If you choice is an economy consisting of
lawyers, coffee servers and I.T. techs instead of real industries,
well that's your choice.  And lets face it, you don't drive the JAP
cars for pure reliability, all cars today are reliable.  You drive

I have a 99 V6 mustang and it has been hard to get it started since about 2
weeks now. Normal starting was just turn the key and not pressing the gas
pedal. Now, if it does not start I have to hold the pedal to the floor
while cranking for about 10 seconds or more. It will finally ...

Since it's sunny and warm out I decided to take my headlight switch out
and to give it a good spraying of contact head cleaner or possibly
replace it. From what I've been told the knob is taken off by pushing in
a clip. I've found the clip but no matter how hard I push I can't ...

I went to the 2007 SEMA show back in November with two friends who are
both Mustang enthusiasts. So my pictures are a bit biased but I still
captured most of the other cars as well.
It was an awesome show but so massive that we didn't get to do much

The interior map light will not turn off

Hey guys,
I have been trying to upgrade my brakes on my 1990 GT and I just
recently dropped about $450 on a set of Power Slot rotors, Hawk pads,
and I decided to upgrade to the SVO 73mm piston caliper for a little

http://culturegarage.com/2008/01/11/ford-sometimes-i-think-you-want-to-fail/
The Black Mustang Club is a large Mustang forum for people who worship
Mustangs, Ford's bread and butter. Like a lot of large forums, they
made a calendar of member's cars to sell. Sounds ok, right?

Looking over my bank statement this last weekend I discovered a $9.00 charge
from a company list as TERRA, somewhere in Florida, with a toll free number
(877-340-2372) called the number and went straight to an answering machine.
Googled the number and found several people ...

My 86 Mercury Capri 5.0 recently had a front end collision and am in need of
a radiator support.  I am seeing several versions at the typical online
storefronts, one for 83-89, and a version for 90-93.  The later version is
indicated as having "reinforcement panels".  Can anyone ...

iv got a 97 3.8 v6 and i want to change the exhaust but i cant figuer
out how to git the old off because i dont want to cut it is there any
way to do that

http://www.thecarconnection.com/Enthusiasts/Spy_Shots_and_Future_Cars/2009_Chevr
olet_Camaro_Best_Pics_Yet.S178.A13788.html
I can't believe they're leaving those gauges down on the console.  And
to me the rest of the dash is cutup looking.  Why didn't they have the
team that did such ...

Bought the car from under a tree.
Got the engine running ok, and replaced a clutch pack and bands in teh
tranny.
Won't engage in any forward gears, reverse works great.

I'm ready to drive my just completed '66 coupe restomod however I can't
because the system is overcharging. When I start the car the ammeter pegs
and the voltage is pushing 16 and goes higher when the engine is revved up.
Needless to say I don't run it very long fearing it may ...

When Ford taunted journalists with its powerful rear-drive Interceptor
concept last year, officials quickly (and repeatedly) noted that there
were no production plans for the car, nor even a rear-drive sedan.
Now, executives in Dearborn are singing a different tune. Both CEO