Can anyone recommend a place to purchase a kit of factory style stickers for
a restoration? For example any emissions, safety, etc... I have a 1987
Mustang that I would like to refresh and replace anything missing or worn.
Thanks.

Will a '67 door mirror fit a '66 ? .......

http://www.thecarconnection.com/Vehicle_Reviews/Pickup_Trucks/2010_Pontiac_G8_Sp
ort_Truck_Preview.S275.A13936.html
Patrick

I have a '01 GT which lately has been acting up - when the engine is still
cold, driving of a stop, anything else but a very light push of the gas
pedal will immediately result in the engine dying. Wont start unless I
floor the pedal, and still takes about a minute to "recover" ...

I have to pull the intake on my 428 FE as there is an oil leak at the
back gasket. Any advice or tips would be appreciated. I've been told
not to use the end gaskets and just use RTV sealant where they would
go. Any other experiences you've had and advice would be welcome.

I have a 1982 SROD (four speed overdrive) manual transmission sitting in my
garage, complete with bellhousing, taking up space.  It's meant to go behind
a 302 of that era, and it's actually in pretty good shape except for a
hairline fracture in the input bearing retainer that would ...

I just finished reading a small article on the new Hyundai Genesis which is
considered a new pony car they are about to release. The article was to
small to bother posting the link and you can easily find better sources to
find out more information.

148 ReCalls
http://www.allworldauto.com/recalls/ford_mustang_recalls_12-436-1.html
1,807 Service Bulletins
http://www.allworldauto.com/tsbs/FORD_MUSTANG_technical_service_bulletins_12-436
-1.html

What is the name of the company that owns the rights to Ford build sheets.
I understand you can purchase, in various configurations and prices, the
original
build sheet for your car when you supply the VIN.

I have an 88 Mustang, 2.3L, 5 speed. Came home the other night, I ran
fine. The next morning, the starter would not work. Changed the
starter, still doesn't work. Tried to chain tow it, and it not run.
Are the circuits for the ignition and the starter tied together? Bad

i want to put a 351w out of a 88 e350 in my 89 5.0 i want to no if my
computer will work with it and if so should i use my stock injecters or
the ones in the 351 and any other ideas would help thank you
--

I realize this is pretty obscure but here goes. A friend of mine has
an 84 SVO with black leather interior/headliner which has been coming
down for awhile but not ripped. The local apolstery legend has told
her that if he fixes it , it wont last very long, also to replace it

dropped 15 to 20 inches generally along I-71.
Naturally some idiot takes a Mustang out in it....
From Monday Columbus Dispatch:
"Montell "Money" Whitfield, 23, of the East Side, was in Canton at 1:30

Hispanic(latino) amateur woman with bracup=2, brasize=4
http://se.servik.com/latinos.htm

A few years ago I rebuilt a '69 GT fastback.  I painted it Ford Mist Blue;
it looked silver in the dark, blue in the light.   Loved that car.  But sold
it to finance another project.   Now I own a 66 coupe that I'v had for about
7 years.  I like this car, too, but I never drive ...