| Thread | Last Post | Replies |
|
| 2009/10 rear end treatment | 28 Oct 2009 05:45 GMT | 5 |
they ruined the look of the rear of the mustang. God it's horrible.
|
| Mustang News, In Case You Missed It | 26 Oct 2009 23:17 GMT | 5 |
All good stuff... read on. 09-06-09: This week has been filled with yet more revelations of new technology coming to the 2011 Mustang. Namely, Ford has two new engines headed for the 2011 Mustang that are a breath of fresh metal.
|
| Ford's New "Big Block" | 23 Oct 2009 16:01 GMT | 2 |
More good stuff... 09-24-09: The long talked about big-block 6.2 liter engine from Ford was unveiled today in Texas as part of the introduction of the redesigned 2011 F-Series Super Duty Trucks. Ford enthusiasts from
|
| Eat MY dust 175 mpg | 23 Oct 2009 16:00 GMT | 1 |
Whale.Steam.Engine.3.jpg Address:http://jeffrelf.f-m.fm/Whale.Steam.Engine.3.jpg Changed:4:44 PM on Wednesday, October 14, 2009 10 % the fuel 13 times the toruk.
|
| Headers for a 84 Capri RS 5.0 | 22 Oct 2009 02:31 GMT | 2 |
The engine has a what can only be described as a "dual snout" air cleaner, with air intake tubes connected to some place in the inner fender liners. It also has tubes connected to the exhaust manifolds to warm the intake air, and sensors on each "snout".
|
| '78 Mustang vacuum plan/chart? | 19 Oct 2009 14:26 GMT | 2 |
My neighbor has a '78 Mustang with the 2300 4 banger in it that he's puting back together and he's having trouble routing the vacuum lines. engine runs, but rough and not right... Anyone out there have a vacuum chart of the engine side? You know,
|
| new comp cams camshaft scratched.. | 19 Oct 2009 08:31 GMT | 3 |
I've just received my new comp cams camshaft for my 1965 289ci's Ford Mustang. The bad news is that the french customs had opened the box and did a little scratch on the last cam journal, where the last cam bearing will be over.
|
| 1999 Chev C2500 5.0 crankshaft | 17 Oct 2009 06:58 GMT | 2 |
This may be crazy, but here goes. I spun a bearing on this truck. As far as I can tell with he engine still in the truck the rod on that throw seems ok. My question is .. Has anyone removed the engine, put it on an engine
|
| 84 Capri RS 5.0 value? | 12 Oct 2009 04:56 GMT | 7 |
No, I'm not going to sell it, but after frustrating searches on the internet, I can't find a realistic value. I'm the original owner, 60,000 miles, stored winters, etc. According to values on the internet, the car is worth
|
| Peugeot's Tiny BB1 Concept Electric Car | 07 Oct 2009 03:43 GMT | 2 |
Peugeot BB1 Concept Electric Car Officially Revealed in Detail http://www.greenautomotive.co.cc/2009/10/peugeot-bb1-electric-concept-car.html
|
| The Z/28 Returns with 556 HP | 02 Oct 2009 23:30 GMT | 12 |
Seems the Caddy CTS V mill will power the upcoming Z/28. http://www.autoweek.com/article/20090922/VIDEONEWS/909229993 Patrick
|