I have a 1981 F-350 2 wheel drive. The steering will not go to the right
much more than 20 degrees,it will go to left  to what appears to be normal.
When I disconnect the pitman arm from the drag link, the steering wheel will
turn equally left or right at the same time ,the wheels ...

Can someone explain to me why none of the truck manufacturers make a one ton
truck with single rear wheels, which has the same load capacity as a present
day dual rear wheel truck. Surely it must be possible to strengthen the axle
and provide tires with a suitable load rating. Such ...

I posted a while back about my '86 F150 eating starter solenoids and am now
ready to just give up.  I have replaced the starter, all starter cables,
checked the block ground stud, run a separate cable from the ground stud on
the block to one of the mounting bolts for the starter, ...

I was wondering if anyone knows what size bolt is in the center of the
crankshaft pulley on a 1986 Ford 150 302.  I need to manually rotate the
engine with a socket and ratchet and I can't really see whats size it is.
The biggest socket I have is a 7/8 and thats too small.  I need ...

hi
im about to purchase a 2K1 ford ranger ( edge )
3.0L V6 auto, 32K mi , asking price $8399.00
is there any thing i should know about this truck? any known problems.

I am replacing the alternator, but unsure where the belt tensioner is.
Thanks,
C Figueroa

I saw a show, Two Guys Garage I think, that touted the Predator
Performance Module for the ford 6.0 Liter Power Stroke.  Seems to
increase torque and HP.  But, will the increased torque/HP increase
fuel mileage?  Seems to me that if the torque/HP is increased, fewer

I have a Ford F-150 2000.  I'm having problems with the two
outside power mirrors and passenger door lock.
The power mirrors only go down and can not move in/out.
Anyone have suggestion on getting this to work?

anybody out there know what the cam and compressin specs are for a 390 GT?
im looking to build one for a project im tinkerin on..or if anybody(
preferabyl in western canada) has a line on some
parts...cam..intake...heads...any help or advice would be great!

How do you do it without any spring tension on a 98 F150?
Thanks
Bob

I'm looking to buy a new truck to pull a gooseneck trailer hauling between
15-20,000lbs.  I see that the F350, F450 and F550 all offer the same
engine/transmission packages.  What is the benefit of going with an F450 vs
F350.

I was able to get a 4mm socket on the adjuster for the headlights, but I
don't have a 1/4 drive ratchet that will fit in that tight space - is there
a special tool I should be using?
John

I just replaced a heater core and one of the heater hoses has a metal
T-fitting with a smaller hose runing down into the engine somewhere.
Where does it go and what is its purpose?
I can trace it with a good bit of difficulty but it's easier to post and

my 95 powerstroke is getting 13 mpg. is this normal? will a chip
improve it? its a 250 4x4. WHat mileage should it be getting? thanks-
chris

I need a CD changer for my 98 Expedition, my kid broke my changer.  If you
have one you would sell, email me!
Thanks!
--Dan