I have a 1970 F100 with a 4 speed manual tranny and a 351 Cleveland monster
in it, but the tranny has the granny first on it so I have to start off in
second. I was wondering if there is a way I could regear the tranny so I can
start off in first and lower the RPMs in 4th when I'm ...

It unzips to a .exe file, I did not click on that to see the result.
his return email address is Harvard, in Boston MA, his ISP is
supposedly in TX and hisIP addr is in IL. WTF?
This guy must be some kind of a-hole, his family are thieves,liars

the same subject posted from multiple sources- not good

I need to pull a mini excavator.  It and the trailer will weigh almost
10,000 lbs.  My '91 F250 diesel that I bought about a year ago, has a
cracked head - $3,000+ to fix.  I may trade it in and get another.
I'm wondering if a larger gas engine might be a better route to go?  Any

Motorcraft lists an alternative platinum plug for the '94 E150 5.8L.
Plug listed is ASF32PF4.  On another forum I have received a couple of
"don't use platinums in this application" messages.  I just wanted to
know if others have had a bad experience running Motorcraft Platinums

    I just purchased a new 2004 Ford F150 Supercab, XTS, 4.6L pickup. A
quick look under the hood and I noticed a main wiring harness to the
computer was laying on the back corner of the valve cover.  I expressed my
concern to the dealership and they talked to their shop guys who ...

Would appreciate advice...Electric window on passenger side has stopped
going up...motor runs fine but seems like the gear is not engaging the
cogged plate.  There appears to be an adjustment screw and lock nut on the
forward side of the gearbox in front of the electric motor.  Does ...

I know I should use Duraliner, but I'm poor, so I've decided to scuff
up my somewhat rusty bed floor, and primer/paint over it...
I'd prefer brushing on some enamel (cream color), so should I get some
@ Home Depot, and some clear poly as a final coat? Any types/brands

I am looking for a drivers side, front door panel for a 1992 Ford F-150, red
in color.
   I haven't had any luck with the junk yards in town or on eBay.
   I could also use the passenger side arm rest for the front seat too!

Looking for a decent F150 Ford pick up truck ,4wd , extended cab ,Short box

hi, a friend of mine lost 1 keyless entry remote for a 2002 ford
ranger, i got one remote from ebay, but i need the procedure on how to
program this remote into the truck, so i can pass on the instructions
to him.  does anyone know how?

I have a 2000 F350 4x4 PSD long bed Single Rear Wheel Drive (3.73) and I
want to convert it to a Dually (DWD).  What do I really need to replace?
I'm thinking Bed, Rear Axle (maybe switch out for a 4.10) and Tires+Wheels
at a minimum.  Is there a good place to get either a kit, or ...

I had a 66 t-bird that I punched out to 406 and used 406 pistons and
rods Mild cam and a holley with a hi-rise
FANTASTIC!    anyway as I can't remember any more .... didn't the 390
have an internal piston and rod change

Is there a solution to getting rid of the continual brake dust on the
front wheels of a 2003 Expedition.It seems to be quite a common problem+
the dealership doesn't seem to have the answer? Thanks Bruce H.

Today I met a guy with one of these beasts.  It was a '04 i believe.  After
talking to him and drooling over the truck I figured I'd check one out for
myself.  Where can I find info on these?  Are they only sold at certian
dealers?  He said something about different stages that they ...