Has anyone checked out their radio ad about $7k off all new F-150's?
I just wanted to know if it was too good to be true, because like most
things, it usually is.
TIA Octo

While driving last night my Over Drive light on the end of my gear shift came
on. Normally that means OD is off. But after pushing the button on the end of
the gear shift it turned off and pushing again it went on. (Over Drive not the
light) But the OD light is still on even though ...

I recently bought a 2003 F250 which has the light switch for the fog
lights(pull out for fog lights) but no fog lights were installed.
Under the front bumper are 3 wires comong out of a loom that look as
though they were cut off.  Two are tan with orange traces and the

I finally got a DC amp meter and checked the draw on my starter that keeps
welding solenoids shut.  The inrush current is 495A and running current is
250A.  Does this seem excessive?  The starter has no problem turning the
motor and none of the cables get even warm after 10-15 ...

Those of you who follow this group may have read or responded to my posts
regarding the premature and uneven wear of the tires on my 20 Ranger XLT
4x4.
In a nutshell, the 245/75R16 Goodyear Wrangler RT/S tires cupped and

Does anyone have experience with a
turbo kit for 1999 Ford SuperDuty V10?
I am looking for a good
kit, easy to install and

Thanks
Nick..

My '73 F250 just started making a noise. It seems to be coming from the
tranny area (automatic FMX). It does not do it at lower speeds, only after
(approx.) 40 mph. The sounds resembles a ratcheting sound. But load, in a
box, aluminumish. Anybody heard that noise?

I'm attempting to put power steering in a truck that originally had no power
steering. pretty much I know how to do it, just I was shocked to hear I
needed a new steering column to go with the swap? was told the steering gear
box was a different size, needed steering column from one ...

  im wondering if the TBI has a fuel shut off, for pressure, or does it
regulate itself?
    Thanks in advance

Questions:
1.  What is the EGR Valve Position (EVP) sensor?  What does EGR stand for?
What does the Electronic Valve Position sensor do?
2.  If this EGR thingy is kaput would it cause rough idling/backfiring

Hi, there-
I have a 1996 F-150, 300 cube 5 speed. The owners manual lists a max
towing capacity of 2000 lbs, which seems kind of light.
I currently pull a Jayco Eagle 10 UD pop up camper (which weighs 1500

I just found this out and wondered if anyone else has had similer problems?
I just put new tires on my 03 F 350 Crew cab at 33,000 miles. The shop put
it up on the rack to do an alienment and both lower balljoints were toast!!
The firestone dealer quoted me $500.00 to do them but as ...

My local trusted Machanic wants to charge me $350.00 labor to replace
the valve cover gaskets. He says its a lot of work to remove and
replace the fuel injector and that that is the only way.
I was wondering if anyone knows if it is possible get a socket in