| Thread | Last Post | Replies |
|
| Pin hole leaks in Navistar Blocks | 08 Aug 2004 13:12 GMT | 21 |
Anyone experience loss of coolant or oil in their water or vise versa with their Ford diesel. Sounds like it's pretty common for the blocks to be eroded by the cooling fluid. Check out ..... http://www.shopdiesel.com/index.cfm/action/coolantfaq.htm
|
| 1987 F 150 Wiring | 08 Aug 2004 07:24 GMT | 2 |
The power windows on my truck have stopped working. I need a good wiring diagram or the location of the relay. Does anyone know where I can find this or can help me locate this relay? Scott
|
| Where is the expansion valve??? | 08 Aug 2004 05:05 GMT | 11 |
I am trying to replace the A/C parts on my 1992 F-150. The old compressor went out and I have got to have A/C! I have to do most of the parts replacement myself as I have quotes anywhere from 1,100.00 to 1,600.00 which I thought was a bit ridiculous
|
| 1994 F 150 - Cruise control | 08 Aug 2004 03:58 GMT | 3 |
It was working great when I parked last night. Today it does not work. Where do I begin? No apparent blown fuse, though I have not gotten out the tester.
|
| hydraulic clutch not disengaging? | 07 Aug 2004 19:08 GMT | 3 |
1994 F150 2WD 5L w/A/C About 5 months ago I had the concentric slave cylinder replaced. Then the next day had the clutch master cylinder replaced. Been problem free until recently. Coincidently, it's been really hot here in DFW
|
| Tires | 07 Aug 2004 03:09 GMT | 8 |
Does anyone have experience with either one of these two tires for 2001 F150 4x4 SuperCab? Wrangler AT/S Michelin Cross Terrain Both are a bit pricey, and both seem to be rated about equal.
|
| 98 Ranger Blower Motor Resistor pack | 06 Aug 2004 14:29 GMT | 2 |
My 98 Ranger heater fan speeds 1-3 no longer work; only speed 4 works. My assumption here is that the blower motor resistor thermal limiter has blown and has to be replaced. My Chilton's manual seems to show its location on the right of the blower motor (attached to the
|
| Who sells discounted A/C parts on the net? | 06 Aug 2004 09:13 GMT | 6 |
Ford is just tooooooo expensive! I am replacing the major parts on the A/C system on our F-150 PU and I have still to get the major and minor hose assemblies for it, as I personally do not believe they can be cleaned out thoroughly enough to
|
| Changing from automatic hubs to manual | 05 Aug 2004 22:04 GMT | 1 |
I have a 1999 Ford F250 Superduty 4x4. It has the shift-on-the-fly automatic engaging 4x4 system. Long story short, it is broken. The current system has a fall back mode. The hubs have two positions, auto and lock. If I manually move them to lock and move the switch on my dash ...
|
| cops said you can't drive with your lights | 05 Aug 2004 16:04 GMT | 5 |
A pittsbrug cop gave me ticket for the 3rd. time for you CAN'T DRIVE W/YOUR LIGHTS PITTSBRUG POLICE YOU CAN'T DRIVE W/YOUR LIGHTS ON for the 3rd. time pittsburg,calif cop stoped me when i was in the parking lot of
|
| oil pan | 05 Aug 2004 14:24 GMT | 6 |
My oil pan gasket on my 91 Bronco full size 5.8L is starting to leak. I read my Chilton's manual. It says to unbolt exhaust, tranny crossmember, and hold the tranny up with a jack etc. Is there any easier way than having to unbolt
|
| need new LH 99 fog light f150 | 05 Aug 2004 03:10 GMT | 3 |
where can i find a replacement for my 99 f150? it`s cracked and lets water in. anyone know a web-site that sells f150 replacement parts? thanks. michael price
|
| Ranger speed sensor adj. | 05 Aug 2004 02:06 GMT | 7 |
I've tried to make this coherant and well thought out...let's see how I did: 1994 Ranger XLT Super 2WD 4.0 V6. Lifted 2 inches. A4LD Automatic Transmission. Babied all it's life and pretty much good/better than new @ 186,000 miles. Came from the factory with 225/70-R14 tires. ...
|
| Test do not read. | 04 Aug 2004 22:13 GMT | 3 |
|
| tail light 1995 F150 | 04 Aug 2004 14:23 GMT | 6 |
I am trying to change the directional bulb in my tail light. There are only 2 screws on the outside which do not seem to do much but loosen the lens. When I drop the tailgate there are 2 more screws on the inside but
|