I am looking at a B&W gooseneck hitch for my 99 superduty does anyone have
any experience with them?
Thanks
Jimmy

Hey group
when I shut off the ignition on my 91 explorer V6  I can here the fuel pump
still running and have to disconnect the battery to get it to stop. can
anyone tell me what could be causing this? it has already killed one

My '94, 7.5liter F250 brakes work fine, don't leak, don't pull, etc.  But as
I apply the brakes, the peddle will slowly sink to near the floor well after
the brakes lock up.
Is this normal for this brake system?

Damned intermittant. I left it with the dealer for two days and it started
fine for them every time. Two months ago they replaced the solenoid.
Earlier this week it failed to start three times in one day and twice again
the next morning. Problem is not related to temperature, ...

I am currently in the process of a buyback on my Lincoln Navigator and was wondering if anyone or aquaintence have experience on their arbitration.  I am preparing for a hearing and would like a little insight on their tactics.
thanks Marty

i have a 95 explorer,when i start it and put it in drive sometimes it will
not engage,acting like its in nuetral.
other times it will go 10 or 20 feet and then ,what seems like its in
nuetral again.

ive asked a pile o questions here in the last bit..( 390 vs cammed
460...snagged both btw) and the info has been quick and right on...now i
gotta ask.i want power brakes in my 65 Merc...i dont want to modify  in any
way if i can avoid it  and have been told that i can use up to a 75 ...

Can anyone tell me where to buy an inexpensive diagnostic code reader
for a 1993 Ford F150 4.9L 6 cylinder, auto, 2wd, ac? Thanks in
advance!

Hello Group,
I need some help getting parts for a 1967 Ford F100 with 352 V8.  I need
front suspension springs.  Can anyone direct me to a source for standard
duty 2WD springs.  Is there another model that the springs are

I have a 1972 F250 with front disc brakes.  Between the front brakes is a
pressure check valve.  
Do not confuse this valve with the proportional valve.  This one is separate
and the incoming line to it feeds from the proportional valve.