Thanks to all of you who offered suggestions on my brake problem.  It turned
out to be a defective master cylinder and a re-built master cylinder with
the exact same problem.  My first clue was the new MC failed the bench bleed
process.  They replaced under warranty and the ...

I have a 1995 Ford Windstar with a 3.8. The overdrive light on the gearshift is
flashing. I don't have a manual. Can someone tell my what this flashing light
means?
Thanks

I'm looking for the tailgate latch {with internal parts} for my 1995
F-250.  Mine is rust bound and stick and jams.  I would prefer new.
I've Googled for about an hour, any sources would be appreciated.
Pete

Hi Group, I have an '87 Motorhome on a Forf 350 Chasis. I have a cracked
exhaust manifold and was wondering if I should put duals on while it was in
the shop. I don't want it to sound any louder though. Would I see any
advange doing this? Any advice would be welcome.

Okay, I have an '82 F-100 which is old, needs paint, etc. but I am
keeping it - it has dual tanks, and my mechanic, after doing a bunch
of work on it, says he put new gas filters inside the tanks, besides
the filter at the carb.  He said the rear one is full of rust...

1978 F-100, 300 six with C-6 automatic, extremely high mileage, and at a
steady cruising speed, it has a loud rumbling and vibration that goes
away if you let off the gas or mash accelerator pedal. Any ideas?

My  '82 F-100's temp gauge doesn't work, and it's the gauge itself -
any ideas on a cheap solution? Thinking of getting an aftemarket gauge
and wiring it in...is this difficult? It's cold now, but summers can
be incredible hot in GA...I have an '86 300 six in the truck...thanks

I replaced the rusted oil pan on my 1993 F-150 4.9L (2Wd 5-spd).  It
took 4 hours.  Probably a pro can do
it in 2.  
My repair manual (starts with an H) listed extra steps like: remove

what fuel pressure shoulsd it be set on? 36?

I bought a `99 Ranger XLT with the CD/Cassette/Radio/Clock Combo.
Does anyone know the recipe to toggle the time when it changes.
I may have to go buy a manual. I was just hoping one of you all would
know.

How can I remove the steering wheel center cover on a 1996 Ford Ranger
to get to the Broken cruise control mount, and is there a handy-man
fix or will I need to buy a new board?
  An Aside, has anyone discovered a way to replace dash lights

Had a problem, (I think) w the positive lead from the battery to the
starter/relay. Kind of a pain to replace, much to my amazement I have no
juice in the trucks electrical system with the exception of the relay
itself. I can jumper the relay and get the engine to turn over, but ...

1998 Ford Ranger 3.0 engine. 93000 miles. Have no control over heater
temperature. Always hot. Hot in every position except AC Max. AC Max seems
to be working normal. All other positions are like temperature is set to
full hot no matter where temperature is set. When I turn temp ...

Hello all, trying to figgure out a little info for my father. He just
picked up a 1963 f150 and wants to know if the engine is origional or a
replacement, what the displacement is, and possibly, an idea to the
plumbing on top of the engine (which side should be the pcv valve, ...