| Thread | Last Post | Replies |
|
| Installed new carb, transmission won't downshift. | 31 Jan 2005 15:13 GMT | 2 |
Installed Edelbrock carb (600) in my automatic 1982 F150. Transmission is not down shifting when accelerating. The kick down rod is actually moving but the transmission is not kicking down. I can manually down shift, and that works fine, but, kick down doesn't work.
|
| 1986 diesel 6.9 stalls after cold starts | 31 Jan 2005 03:48 GMT | 2 |
New fuel pump installed. New O-rings on injectors installed. Truck starts fine when cold but stalls within 30 secs and is very hard to restart. Runs and starts fine all day once you restart it
|
| 93 Ranger timing belt installation | 31 Jan 2005 03:27 GMT | 3 |
Can somebody tell me which way the bolt loosens on my 93 ranger so I can put a new timing belt on it? My Hanes manual doesn't seem to mention it.
|
| Manual transmission on my '88 PU | 30 Jan 2005 18:03 GMT | 1 |
Today I accidently shifted from 5th to reverse and ground the gear some. From that point on I lost the ability to shift into 5th or reverse, which of course are on the same plane.
|
| Thinking about 250 HD for plowing... | 30 Jan 2005 16:50 GMT | 2 |
Any comments on experience with plowing using a Ford 250. Thanks...
|
| Dimmer switch? | 30 Jan 2005 02:25 GMT | 1 |
Will a dimmer switch gone bad,keep the headlights from working.I have a 84 f150, old floorboard dimmer switch.Replaced headlight switch last in 03. Thanks,Marvin
|
| WTB: ashtray for 98 F150 | 29 Jan 2005 12:11 GMT | 2 |
I bought a repo 98 F150 XLT and the ashtray is missing (the drawer under the pull out cup holder). Color : burgundy. Anyone know where I might find one out of a junkyard? Glen
|
| Ford Ammeter | 29 Jan 2005 11:56 GMT | 1 |
Hi Group, I am a newbie to Ford Trusks,( Any trucks actually.) I recently bought an '87 Motorhome with a 460. The ammeter hardly moves at all. With the engine not running and all electrical on, lights, fan etc, the needle moves only about 1/16 of an inch discharge. With the ...
|
| fluctuationg Oil Pressure | 29 Jan 2005 09:49 GMT | 5 |
My wife has a 2001 Exploder with the 4.0 engine. For the last two weeks the oil pressure fluctuates from very low to normal setting off the check gauge light. Doesn't happen every time she drives the car, just once in a while. I'm taking the car in today. Any guesses as to what it ...
|
| F-450 Engine Swap? | 29 Jan 2005 09:00 GMT | 5 |
Here's a question for the group. I am buying a '92 F-450 wrecker in good condition to convert to a Gooseneck/5'th wheel hauler with a small sleeper cab added. (The dealer bought it just for the wrecker gear and only wants $1K for the truck...so it's a steal!). Will be hauling ...
|
| Where is the fuse puller? | 28 Jan 2005 10:38 GMT | 6 |
I have had to spend time with the fuse panel in my `04 Ranger today. I cannot get a head on view of this panel, and replacement of 6 of the fuses in this require a better view than what I can get. I stretched the contact of the stereo fuse receptacle trying to rob power
|
| 4x4 cutting out? | 26 Jan 2005 23:13 GMT | 4 |
Hey, here's a good one I just found: I have an F250, 5.4l motor, 4x4. and while driving today, with the hubs in 'auto', the 4 wheel would just cut out and go to 2 wheel for no reason. The switch on the dash stayed at the 4 wheel position, but it would just go into
|
| Ford Ranger Problem | 26 Jan 2005 19:09 GMT | 2 |
My check engine light came on in my 96 Ford Ranger and the reader said this: P1443 Evap. Emission Control System Control Valve. Is this a major repair or can a little shop fix this for me? Thank you,
|
| '71 f100 A/C question | 26 Jan 2005 17:05 GMT | 2 |
I found a decent, fixer upper, underdash condenser/blower duct a/c unit from a '72 in the local U-Pick-It. My '71 originally had a/c but this part was missing. I wasn't planning on reinstalling an a/c system in the near future, but I thought I'd grab it tomorrow when I go back. Is ...
|
| Ford F150 1988 fuel guages | 26 Jan 2005 04:48 GMT | 2 |
I have a king cab with dual tanks. When I fill the tanks, the guages go to full. They stay at full until the tanks are near empty and then they drop. I'm thinking senders but the common link would be the guage or the switch for the tanks. Has anyone out there seen the same problem?
|