Hay everyone got a couple of Questions for you. My brother pick
up a 88 Ford Bronco II with the 2.9 V6.  Its got a 3 inch lift on it. He
wants to change all the fliuds Tranny,front and rear diff's and tranfer
case. What do you guys recommend?? Thanks in Advance!!!!!!!

  I am about to do another tranny service on my 460   C6, It has 114,000
miles on it and runs like new
(Well almost LOL) Could anyone recommend the best fluid for this tranny?
Thanks a lot,

I have a problem with the ABS system on the rear brakes of my F250 (has
disc brakes on the front).  It has a new master cylinder, new ABS valve
unit (bolted on frame uder driver's seat), and the rear brakes and brake
cylinders are new.  I have a hard pedal when the engine is ...

Hi, i try to restore a `33 Ford bb truck, This is the first time for me! if
someone has any tips for me please let me know!
this is my site where you follow the results!
http://fordbbtruck1933.web-log.nl/

My 1986 F250 clutch does not disengage completely. What needs service,
replacement? Why? The transmission is 4sp, clutch is hydralic. The hyd
resovoir is full. There are no leaks at the master or slave. Peddal
"feels" normal both in compression & release, not too soft or hard. The

Has anyone installed a front mounted "Hidden Hitch" receiver under the
front bumber of the Ford F350? The bumber must be removed, driving
lights removed, then HH reciever & bumber reinstalled (without lites).
Mine is a 2002 Diesel 4WD. The Hidden Hitch diagram is over simplified

I have a 1999 RV with 11k miles on it, it has the V10 engine.
Yesterday morning I started it and the Brake and ABS lights came on. Anyone
know the most common cause and fix?
Thanks,

I have a Motorcraft Holly 4 bbl carburetor that came out of an F250;
data plate reads D2 HF DA and C8A26.  No idea what engine it came from.
 Can anyone identify the model, CFM, etc?
Don

I have a 99 Expedition 4.6L 73,000. I've been experiencing misfires under
load. Most usually around 45 to 50 mph 1400 rpm. If the truck needs a little
oomph to go up an incline the engine will seem to misfire until I hit the
accelerator and it shifts out of overdrive and the ...

I am in Hawaii on the Big Island Kona side.
I recently bought  a 1999 Ranger 3.0L.   At what milage should a Timing
Chain be changed, what dammage can it do, if it breaks? Must it be done by
the dealer? What difficulties are there in a do it yourself replacement of a

My 94 Ranger with a 4 liter engine and AT does not pull my 20 ft travel
trailer well. On hills and at highway speeds the engine-check light will
come on and  will start missing and lose power. After a 20 minute rest it
will run good for a few miles then start missing again. It ...

Anyone else experience a problem with trying to get the key to turn in
the ignition switch. Ours has on several occasions locked up to where
the key won't turn in the cylinder. Moving the steering wheel up or down
doesn't help and of course you can't budge the shift lever.

I just purchased an F350, V-10 gas, 4WD, with a dump bed.  The rear bumper
is sturdy iron C-channel and I need to install a class 5 receiver hitch.
I've looked at a few hitches online, but they all look like they fit the
standard pick-up bed configuration, and haven't found anything ...

1999 ranger 3.0L I found a leak in my lower radiator T shaped hose.
what needs to be taken off to get to the arconditioning connection. Wow it
seems so hard to un-clip the clip and work on it.  Anyone ever replace that
T shaped hose? Is there a special tool to unclamp the hose ...

Anyone know where I can find good info on the net in respect to ford vans
and their upkeep, trying to get my 98 ford E 250 to guzzle a little less gas
??????
any info is appreciated