| Thread | Last Post | Replies |
|
| Engine codes | 25 Mar 2005 03:02 GMT | 1 |
Concerning the 2001 Ford Sport Trac, Is there any way to extract and decipher engine codes by using the dash buttons, ala GM cars? Have check engine light on and would like to know what the problem is. Thanks in advance.
|
| 04 Ranger 4 Cyl Gas mileage query | 25 Mar 2005 01:28 GMT | 6 |
I'm looking at an 04 Ranger 4 Cyl. One of a very few left on the lots (great discounts). I will occasionally haul furniture items and other objects, not exceeding 500-600 lbs. I'm concerned with gas mileage considering prices of late. I was wondering if I'd see $1.29 per gal., ...
|
| Ford Excursion floor mat patterns | 24 Mar 2005 14:00 GMT | 1 |
Is there anywhere to get paper patterns for floor mats or web site with dimensions to make your own? I have some carpet remnants that would make some good mats. Thanks, Norris
|
| FS: Superduty Suspension Lift | 24 Mar 2005 09:01 GMT | 2 |
For Sale Explorer Pro Comp Leveling Kit with shocks 2 1/2" Leveling Kit Front Springs
|
| Cargo mat | 24 Mar 2005 02:26 GMT | 6 |
Years ago, I had a 91 ranger I bought a rubber, non slip mat for. It appeared to be made of recycled tires and had to be cut down to size for a good fit. I bought a new ranger (sold the other one with mat a few years ago). I'm looking for one of these and can't find them anymore. ...
|
| How much weight on ledge in Ranger bed? | 24 Mar 2005 02:24 GMT | 2 |
I built a wooden frame to sit on the ledges so I could carry stacks of rigid plastic sheets that are 4' wide as the floor is not wide enough due to the tire wells. I hauled 200 Lbs with no problem, but I wonder what the load limit is on the ledges. They seem to be stamped in to the ...
|
| Will a 1994 Mazda B sreies Bed fit a 1994 Ranger | 22 Mar 2005 16:55 GMT | 1 |
Does any one know if a Mazda B series bed has the same amount of bed bolts as a ranger 1994, will the beds interchange>?
 Signature Posted using the http://www.autoforumz.com interface, at author's request
|
| FS: Vintage ANSEN slot mags | 22 Mar 2005 04:08 GMT | 1 |
I have 4 ANSEN machined slots. 15x7, 5x5.5", 3.5" bs. These are vintage 70s so they all have minor little dings in them, but are a really nice set. Great for period restoration. $350+ ship
|
| Original equipment, Centurion | 22 Mar 2005 02:49 GMT | 1 |
is there a way to determine the original equipment for a Ford Centurion, 1996? maybe through the VIN? I mean the obvious is not what I'm looking for, but things like tow pakage, plow package, or any package not readily apparent.
|
| Stalling 2004 F150 Lariat Crew Cab | 22 Mar 2005 00:38 GMT | 1 |
My brand new F150 has started stalling when I slow for a red light or slow to turn, not everytime but often enough to worry about it. The truck has less than 4000 miles on it. Has anyone else experienced this
|
| F150 wheels | 22 Mar 2005 00:33 GMT | 3 |
Hi all. New to the group and recently picked up an 89 F150 lariat 4x4. Wanted to know if the back spacing and bolt hole are the same as current models? And if not, would you know what years are the same?
|
| Misfire | 21 Mar 2005 22:36 GMT | 4 |
I have a 1997 ford Areostar with a 3.0 litre,the problem I am having is rough idle and I keep comming up with a misfire code . The EGR is new and is not showing as passing its tests as well as the catalytic is not sending an OK signal.
|
| What would cause choppy acceleration | 21 Mar 2005 22:20 GMT | 5 |
The check engine light came on, not only that but I feel when I accelerate through the lower gears it doesn't accelerate smoothly but rather choppy. I have a 99 Ford Ranger Super Cab 4x4 with the off road package. If somebody could help me out I would greatly appreciate it.
|
| looking at super duty, 6.0 or 7.3? | 20 Mar 2005 20:49 GMT | 2 |
Hey all, buddy of mine is looking to buy a 4x4 Super Duty truck automatic and diesel, which motor is better? He's had an older F250 with the 7.3 and liked it, but how are the 99-up 7.3 or the 6.0? Are the newer years better or would a
|
| Opinions on a 97 Explorer | 20 Mar 2005 19:13 GMT | 4 |
I am looking at buying a 97 Explorer with 128 k. It has a 4.0 motor and I haven?t ever driven a ford before. I really would like to hear of any major problems with this vehicle.
|