Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Trucks / May 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
94 explorer vibration shutter drivetrain.07 May 2005 14:46 GMT4
Hello.  I have a 94 ford explorer.  182,000 miles.  Original owner.  
Maintained very well.
Problem:  You can be driving down the road with your foot off the gas at
any speed and no vibration.  When you apply power or load the Drive train
Lund Sunvisor07 May 2005 03:36 GMT3
I just picked up a used Lund sunvisor. Can anyone help me with what screw to
use? I contacted a few dealers, but haven't heard anything back yet. Can
someone direct me to a picture of the screw so that I can try and find a
replacement? Also, does anyone have installation tips? It ...
I need a 49-54 sterring box06 May 2005 22:43 GMT1
F100- anybody have tons of  them laying around?
seatbelts06 May 2005 19:04 GMT3
My 1982 F100 still has original seat belts
How difficult is it to change the seat belts and where should I purchase new
ones?  JC Whitney??
The pickup has three sets of belts; driver, passenger, and middle.  The
Email Address06 May 2005 06:18 GMT5
Anyone know of a good email address where I can write to Ford motors.
I experienced some really shitty service from a so called "President
Club" dealer.  I have emailed them to no avail and aren't you suppose
to get a survey form ford asking about how you were treated?
1992 Ranger Transmission change Auto to manual ???05 May 2005 22:07 GMT2
Just wondering if it's possible (practical) to change a 1992 Ranger 3L
V6 from Auto to a manual trans.
Thoughts ??
Thanks much,
water leak in my 94 ranger05 May 2005 22:00 GMT2
Hi guys new here and this seems to be the right place to post, I have
a 1994 ranger standard cab short bed, 5 speed manual locks ect. ect.
and I got this truck from my dad’s friend it had been sitting in his
yard for 2 years or so. I first got it payed to have the motor and
Door Bell Squelch05 May 2005 05:33 GMT1
Please Help:
I can not stand the ding dang bells that go off every time I open the door
with the key anywhere near the ignition, the frantic headlight warning
chime, the seatbelt buzzers and that annoying bing x 6 that tells me the
Are rims older or newer?05 May 2005 03:43 GMT6
Have oem 16"X7" 8 hole rims
How can I tell if these rims are the newer metric size or the older
non-metric size?
Writing on inside of rims says:
2004 F15005 May 2005 00:29 GMT4
 Does anyone have the 'dreaded vibration' in their steering, braking or
the whole truck?  The Ford dealer here has tried several fixes but none
worked- -new tires and wheels, road force balance, new driveshaft,
dampeners on body mounts. . . . .   Anyone out there with any luck ...
anti theft alarm04 May 2005 22:50 GMT1
my 98 ford f150 has problems with the anti theft alarm. it goes off for no
reason at all at all hours of the night. how can i disconnect it? please
help
2005 Expedition Problems04 May 2005 16:15 GMT2
Customer has a 2005 Expedition that we installed emergency lighting
into. After the install was complete, the ABS indicator lamp as well
as the BRAKE indicator lamp continue to stay lit.
The 4X4 HIGH indicator lamp flashes for a few seconds and then goes
Tie rods on 96 F350 4x404 May 2005 05:57 GMT15
   I have to replace all the tie rods on my 96 F350 4x4 Crew Cab.  I rarely
drive the truck off the road and never beat on it, so I'm curious if anyone
has any quality issues with the tie rods available from Shucks and the like.
Specifically McQuay Norris and Duralast.  The price ...
ford f-150 lower ball joints03 May 2005 03:46 GMT3
I have a 2000 ford f-150 that needs to have upper and lower ball joints
replaced. The service manual says that the lower ball joint it self can
not be replaced. It says that you must replace the whole lower control
arm. The parts store sells the lower ball joint by itself. Can the ...
headlights03 May 2005 01:10 GMT4
Is it really advisable to change both headlights at the same time??  I
changed one a couple months ago & noticed package recommended changing both
at once.  Is this just marketing?
The other headlight is pretty old, possibly 8-10 years.
Pages: 1 2 3 4 5 April, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.