What is the cheapest and best way to get some big wheels to go on may 1988
ranger 4x4 without rubbing on the corners?

The other morning, I backed into my parking space at work.
When I returned later that day to go home, getting the truck in
gear was really hard to do. I thought I was going to break the
shifter. It's the only time it's done that.

my buddy has a ford 150 ,1997 ,truck ran great went out to get in it to
go to work and it wont start,he changed the starter with a new one and
the cellnoid was also changed ,you can hear the starter engage but not
turn over the motor

I have unscrewed the 2 phillips head screws on the driver's side of the
lense but the whole thing appears to be 'interlocked' somehow. Any ideas?

Anyone know if there is software and cable diagrams to make a laptop OBD
Reader?
Stephen N.

Does anyone know a good VIN Plate decoding website for the 73-79 Era?

I am going to be getting an F350 Super Duty for work soon and have a
question:  Does anyone know if there are any available fuse positions
to use electronics on an ignition controlled basis?  I don't want these
things running all the time as there will some current draw that could

I'm going to buy a new F-150 truck. I can order it with a Flex Fuel V8
engine for no additional cost. Should I do this? Is there any down side
to the flex fuel engine?
Chip-Las Vegas

Okay, I give, I'm cross-eyed trying to find this stuff...... working
on-line to get the ratios and actual facts given the following
codes......Just bought a solid used:
'99 F350

Q : Fuel Pump
Problem is, my fuel pump i recently installed is bunk, it turns on (i can
hear it) but doesnt keep the backflow pressure up ( a seal maybe dried out)
anyways my gas moves from the rear tank, the filter acts as a backstop and

I have a 94 F150 XL.  Reg cab short box, 4x4.  Everything stock now but have
some questions.  Stock what is the largest tire I cab fit under her without
rub and with a 3" lift what would fit under her?

Where can I get engine HP and Torque specs for Ford Bronco 5.0 and 5.8
engines.  I'm interested in the variations over the years 1987-1996.
Also,  it would be nice to review differences in the EFI systems over all
those same years.  And differences in the 4x4 setup.  As you've ...

I can buy a new F-150 with a 3.55 or 3.73 rear end gear ratio. Anyone
have a recommendation on which I should buy?
Chip

2001 Ranger 3.0 will not start, "Theft" light blinks very rapidly when
turning the key to start position.  I know that at least one of the
transponder keys is functioning.  I have heard that there is a way to
temporarily bypass the PATS system and start the vehicle.  Anyone out ...

Ok, dumb question for the rest of you who know what you're doing:
Just bought myself a CB radio, something I've been wanting for a long
time.  I've got a 1999 Mazda B-2500 (Ford Ranger), and the manual for
the CB says to connect it to the ignition switch accessory terminal.