| Thread | Last Post | Replies |
|
| Waterpump 1984 E350 | 10 Feb 2006 21:01 GMT | 15 |
I am trying to change a waterpump in a 1984 E350. It seems the threads need to be rethreaded on the two boltholes that go into the engine block. The bolts go through the timing chain cover.
|
| 89 F-150 No headlights,radio,cruise | 10 Feb 2006 20:20 GMT | 2 |
Any idea why they all quit working? Battery and fuses are fine. wires seem fine. Any help much appreciated -- cheezinoot -----------------------------------------------------------------------
|
| Anybody Lift a 2005 250 SDuty 4x4 | 10 Feb 2006 04:05 GMT | 1 |
2005 4x4 F250 SuperDuty Looking to do either the 2 1/2 inch spacer kit on the front coil springs. Does the truck sit level? Or the other more expensive option is a 4 inch suspension.
|
| cleaning chrome wheels | 08 Feb 2006 06:12 GMT | 1 |
How do I get salt and break dust off my crome wheels? Also rust -- cheezinoot -----------------------------------------------------------------------
|
| Instrument Cluster Lamp Replacement | 06 Feb 2006 21:21 GMT | 5 |
My overdrive lamp just went out. Hopefully someone has done this job before.I am looking for some suggestions on how to replace the bulb.
|
| 90 f150 , no fuel delivery | 06 Feb 2006 01:43 GMT | 3 |
90 F150 .. dual tanks (rear tank leaks , never used) Truck was run with next to no gas and likely ran dry. Chugged out appx 1000yds from home. Added 3gals but no life. Mechanic frien took a very fast look and determined that theres no fuel pressure at the engine.
|
| 2000 F150 Power steering question | 05 Feb 2006 20:29 GMT | 2 |
1)I have a 2000 F150, 4X4, that has made a now when the steering wheel has turned since I've owned it. It is like a "hissing" sound, no problems with the steering itself. The fluid is fine, haven't had to add any. Any ideas? 2) The driver's side window has quitting going down all ...
|
| PCV Valve Location | 05 Feb 2006 14:42 GMT | 1 |
Where is the pcv valve located on my 1995 Ford F-150? Any help is appreciated.
|
| Ford 300 cu in 6 cylnder | 05 Feb 2006 07:56 GMT | 2 |
I have a brand new distributor and carburetor for one of these. Can someone suggest a way to advertise these to reach the most likely buyers? Thanks
|
| F250 oil pressure question | 04 Feb 2006 03:19 GMT | 6 |
I have an 89 F250 diesel with a banks turbo and 60K miles on it. Nice truck. Recently, I was towing 9000 lbs of trailer across the Appalachians, and my oil pressure went from the bottom of the "low" of normal to just
|
| Would you buy this truck? | 03 Feb 2006 04:23 GMT | 14 |
How afraid should I be of buying a 10 year old Ford F250 that has had service with a fifth=-wheel hitch? It's at a dealer...so there's no one to ask what percentage of it's 65000 miles were driven with a heavy trailer in tow...
|
| Warranty | 03 Feb 2006 00:48 GMT | 5 |
Anyone have a perspective on the 100,000-mile warranty Ford offered on the 7.3 liter Diesel (1999 version)? I have an F-250SD with 99,870 miles on it, and the local dealership just charged me a lot of $$ to replace a water pump. When I asked about the warranty, the, um, service ...
|
| 1998 4Cyl 2.5L Ranger Idle / Stalling Problems | 01 Feb 2006 02:33 GMT | 1 |
I have a 1998 Ford Ranger (4 Cyl, 2.5L, Manual Transmission) that I bought used a couple years ago. It's been running fantastic other than a little burp here and there. I recently took it to a Super Wal-Mart to get the oil changed, and I
|