I have a 92 Ford Ranger I drove it to work one day it started and ran fine.
I went to leave for lunch and it would not start, Took me 20 minutes to get
it started. It idled a little fast and you couldn't give it any gas, Or it
would cut out and backfire.

I want to add a *slight* lift to my 1996 F-250 4X4, nothing crazy-maybe
2". I found a kit that basically uses 'helper' leaf springs in both the
front & rear of the truck to gain a lift of 2".  No other mods are
needed (so says the ad). My question is...will the truck tend to "road

My son's Sport Trac has the following error codes: PO171 and PO174.
Anybody
able to assist in identifying the cause? The breakout (based on the
Autozone

It seems like when the air is on the clutch on the a/c constantly
kicks in and out and does not cool very well? Any idea's
Thanks for your time

My 98 Expedition driver window will often not go down or will stop
midway intermittantly.
Changed the motor and the proble continues. Turns out when the switch
is depressed the motor is only getting 8 volts (in the window up

   Hi, All,
   Just wanted to bounce this off of the Ford truck gurus hanging out in
this NG, as I'm not finding any real specific answers doing general 'net
crawling.

My dad has a 94 Ranger 3.0 V6 160 thous miles, who doesn't believe in
taking to a shop to have it fixed right. The problem is when you try to
start it , periodically it clicks no crank. After a while it will start
on its own. It will not take a jump. Starter relay been replaced. Two

During HOTT days my '97 4.0 Ranger will not stay running ,or idle after
restarting the truck.
Anyone have any ideas what the cause might be?
Thanks,

What type of engine oil should be used in my new 2006 4.0L  Ranger?  In one
section, the owners manual says to use Motorcraft SAE 5w30 oil or an
equivalent 5W-30 oil meeting Ford specification WSS-M2C929-A.  In a
different section, the owners manual says to use Motorcraft SAE ...

There is a 1968 Ford Pickup (I believe an F-150) being sold by someone in my
area and I am thinking about buying it. But I'm not sure what the going
price might be.
Here's what I know right now.... 68 Ford Pickup, 6 cyl, 78k, one owner...

Can anyone decipher the code for my rear axle? The truck is a 1996 F
250  w/5.8 auto 4 x 4  and the tag on  the door jamb for the axle reads
'39'  anyone have any idea what axle this is? The reason why I need to
know is that every time I need to buy suspension parts (shocks U-joints

Does anyone have some guidance, or rule of thumb, about how close a
nail puncture has to be to the sidewall to be considered
un-repairable?
Searches left me with nothing tangible.

I've worked on this truck since 1998.
Please visit: Ford Truck World
                  http://www.fordtruckworld.com/AmericanBLUZUMR
List of products used in this build up.

Ok.. We're working on a totally stock 94 5.8 Bronco that ran before we
started all this.  We started out fixing a broken off bolt that holds
the timing cover housing on.  Once we got it drilled out and a new heli
coil in.. we started to reassemble.  We thought.. since we were in

I've worked on this truck since 1998.
Please visit: Ford Truck World
                  http://www.fordtruckworld.com/AmericanBLUZUMR
List of products used in this build up.