| Thread | Last Post | Replies |
|
| working on Excursion | 22 Sep 2006 03:41 GMT | 7 |
My question, is it as easy as working on an F250? The story- My current vehicle is a 1978 Chevy C-20 that I bought in 1995 or so. Married, child, and I was a mechanic before my current life. My thought is to buy a used, high miles Excursion since it is
|
| Switch or Fan Blower? | 20 Sep 2006 04:46 GMT | 6 |
My air conditioner works fine, but only on high (lots of air). Doesn't seem to blow at all on lower speeds. As I don't know how these things are wired, which should I replace, the fan switch or blower motor? Thanks for any input.
|
| 97 Mazda B4000 transmission question | 20 Sep 2006 04:01 GMT | 4 |
97 Mazda B4000 truck, 4.0L V-6, 4WD, 5-speed. Bought the truck in January, used with 89,000 miles. After driving it for a month or so, I found that after driving it for 20-25 miles, the transmission almost would not shift into 1st or 2nd -- I had to shove
|
| 2001 Ranger A/C problem | 19 Sep 2006 02:01 GMT | 2 |
Hello group, I'm experiencing some unusual behavior from the A/C on my 3L 2001 Ranger, and I'm wondering if anyone may have encountered this issue. I bought this truck a month ago, and I noticed this behavior for the first time within the
|
| Fuel Tank Size and running out of fule? | 19 Sep 2006 01:54 GMT | 9 |
I've got a 2005 F350 diesel long bed with a 38 gallon fuel tank and 37,000 miles. Yesterday I encountered a situation where the engine started acting like it was running out of fuel. I was pulling my 13,000
|
| 2000 Ford F150 power locks not working | 19 Sep 2006 00:09 GMT | 1 |
the locks wont unlock or lock whenever i press the button on the door and i could hear them trying to unlock/lock. what should i do?
|
| Backup lights switch | 18 Sep 2006 05:06 GMT | 11 |
I have a 1989 Eurocoach Motorhome with a Ford 460 gas and automatic transmission. All four backup lights are not working and I'm looking for the control switch. Can anybody tell me where I can locate this switch, is on the steering column or trans?
|
| oil drain valve | 17 Sep 2006 05:13 GMT | 2 |
I'm thinking about getting the Fumoto drain plug for my 1982 F100 302V8. Has anyone had experience with these type of drain plugs? It looks like it may make oil changes a little easier, this is the web site;
|
| 1985 F-150 Gas tank & Master cylinder issues | 16 Sep 2006 22:33 GMT | 1 |
I Just bought my first Ford truck a few weeks ago (4.9 liter) and am trying to address all sorts of issues in fixing her up. Only 2 questions for now though. 1. Ive got a broken fuel gauge and plan on dropping the gas tank
|
| 1989 F250 460ci pings under load??!! | 16 Sep 2006 16:08 GMT | 12 |
Hi all, I was wondering if anyone could help me. I got a 89 F250 with a 460 in it. It pings when I am going up hills, pulling a trailer or not. Worse when I am pulling. I have to shift down to stop it. Anyone know what is causing it to knock like this?? I checked the timing ...
|
| O/D SWITCH | 14 Sep 2006 23:01 GMT | 3 |
THE OVERDRIVE SWITCH OF MY 96 RANGER XLT IS LOCATED ON THE GEAR SHIFT HANDLE. THE WHOLE THING (O/D SWITCH) WAS TORN OFF BY MY EX. NOW THE WIRES ARE EXPOSED. MY TRANSMISSION HAS STARTED SLIPPING REALLY BAD. THE O/D LIGHT KEEPS FLASHING ON AND OFF. IS THIS SLIPPING CAUSED BY
|
| 1989 Ford f250 | 14 Sep 2006 13:52 GMT | 4 |
ok so my uncle has a 89' f250 and we are trying to replace the head gaskets and the intake manifold. Is there any possible way we could get instructions from start to finish? maybe a website or something. thanx
|
| 91 Ford Bronco XLT 4x4 - What is my max tow weight? | 13 Sep 2006 21:59 GMT | 3 |
Does anyone know the max tow weight on a 91 Ford Bronco XLT 4x4? I am purchasing a PopUp trailer this year, and I wanted to get an idea of the weight I can pull w/ my truck. Any tips or ideas?
|
| 1995 f-150 need info.! | 13 Sep 2006 01:36 GMT | 1 |
I just bought a 1995 f-150 xlt 4x4 extended cab long bed. it did not come w/ a manual and i have very little info. on it. i have searched the web and anything that i could find to get some more information on the truck. if anyone knows anything about this kind of truck, or has a
|
| Aerostar and 'new' engine | 12 Sep 2006 10:10 GMT | 14 |
I have an '86 Aero with a 3.0 FI blown (and I mean destroyed) mill. I'd like to keep the 5-spd tranny and put a 302 up front. The 6-cyl bell doesn't fit the 8-cyl engine... Anyone know of a replacement bell that will mate these together?
|