| Thread | Last Post | Replies |
|
| 1983 Ford Ranger 2.3l 4cyl, 5 speed manual | 12 Sep 2006 00:35 GMT | 1 |
Hello. I was wondering if anyone has had this problem also. After 10 min. of driving and truck is warm, there is a constant high pitch squeal or whine whenever the truck is coasting, gearing down or braking. The pitch is constant. It does not change with engine speed or
|
| error codes PO102 & PO305 | 11 Sep 2006 19:19 GMT | 2 |
Any advice on how to troubleshoot these error codes on my 1995 ranger 4.0 ltr.
|
| 95 Bronco Check Engine Light | 11 Sep 2006 19:02 GMT | 22 |
I just bought an Eddie Bauer Bronco and have piled on 200 miles already. The Check light came on this evening -- argh -- but it goes out if the key is swtiched OFF then ON, and driving is normal. The light will come on again after about 3 minutes. It seems that the light comes on ...
|
| Repaint choice | 10 Sep 2006 00:24 GMT | 11 |
My '81 REALLY needs new paint. I've check all around the area and I have exactly two choices....Maaco or Econopaint. It seems body shops don't do repaint jobs anymore. I'm not looking for a custom paint job, just one where the paint won't fly off when I'm goin' down the road. I
|
| A Different Kind of FORD EXPLORER AC Problem | 09 Sep 2006 22:35 GMT | 1 |
I have a 2002 Ford Explorer, that had a very good ac two days ago, but now nothing comes out of the vents. I hear the compressor working when I turn it on, and hear it get louder as I turn it up . Though I can feel cool air coming from the dashboard, nothing comes out
|
| Advice needed about putting a child-seat in a Ford Ranger X-cab... | 09 Sep 2006 12:48 GMT | 2 |
Hi everyone, I recently purchased a 2000 Ford Ranger w/ X-cab. My question is does anyone know if it is safe and/or legal to put a child-seat, for a toddler, in either the front or the cab? My quess is that it probally wouldn't work to put him in the cab because the seats
|
| explorer 2001 bleeder screws frozen | 08 Sep 2006 21:58 GMT | 5 |
Just a note. I am working an explorer 2001 and the b leeder screws are giving me a fit. I have stripped the hell out of two trying to ge thtem out and ended up changing one caliper.
|
| 1995 f-150 fuel tank | 07 Sep 2006 10:49 GMT | 2 |
my f-150 has 2 gas tanks. the only one that works is the rear tank. when i switch to the front tank, the engine will die out. i do not know what is wrong. is this a common problem?
|
| 2000 Ranger Manual Transmission - I need some CLUTCH CHANGING TIPS!!! | 06 Sep 2006 16:03 GMT | 15 |
I want to change my clutch but the manual says you need a special tool from the dealer to separate the clutch/slave hydraulic line from the transmission. It says it's like a quick connect fitting that 'pops' off and then you just 'pop' it back on -- so you should not have to
|
| 4.2 vs. 5.4 | 06 Sep 2006 09:40 GMT | 2 |
i am thinking of trading my truck -2000 f150 supercab 4x2 for a 2003 supercrew 4x2 the 2000 has a 4.2 engine and the 2003 has the 5.4 and i wanted to know the reliablity of those engines and the difference in gas mileage.
|
| Sticking brakes on f250 | 06 Sep 2006 02:32 GMT | 2 |
Hello! I was wondering if anybody here could give me a little advice? Here's the deal. I bought this 1994 F-250 sight unseen in Seattle on e-bay. Wise? Time will tell. The seller didn't lie. But he isn't a mechanic either. So far, it's been fine after I did all the major maintenance ...
|
| Gas Guzzler (Sport Trac - Explorer Truck) | 06 Sep 2006 02:29 GMT | 3 |
I was wondering what everybodys gas milage is that drives a Sport Trac (Explorer)... I am finding that I have to fill it up every week. I travel about 20 miles back & forth to work. It seems like I am not getting the best gas
|
| Deposit | 05 Sep 2006 18:48 GMT | 1 |
Thanks Josh, Deposit came through this AM. Dad
|
| no idle when cold | 05 Sep 2006 04:49 GMT | 1 |
2000 F250 SD, V10, STD cab, 8' bed, 4 speed auto w/overdrive. After sitting for several hours, starts just fine, but won't idle. Drive it for a couple of minutes and it will just barely idle @ 400 RPM in gear. Drive it 10 minutes or more and it idles just fine @ 700 RPM in gear. ...
|
| Ideas for flexible tube? | 04 Sep 2006 16:15 GMT | 5 |
The fresh air intake tube(duct) on my '81 is falling apart due to age. This piece is the flexible plastic transition tube(duct) between the intake at the grill and the air cleaner. Prowling the junk yards is out. I know I can buy the piece from LMC, but it will cost almost $20
|