Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Trucks / November 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
1994 F-150: Rumbling front brakes after brake job?10 Nov 2006 21:24 GMT6
F150 1994 105K Miles, 6 cyl, ABS rear only
Several weeks ago, I began hearing rumbling from front end when brakes
were applied.  I figured it was time for new brakes and just finished
replacing rotors, pads, bearings, etc this morning.
87 f-150 rear antilock light on??10 Nov 2006 05:00 GMT9
The light popped on my 87 f-150 4.9 6cylinder  2 wheel drive.   Any
ideas?? Thanks:)Nel
Check GAS CAP error message on 2003 Ford Expedition10 Nov 2006 03:09 GMT1
We've been to the dealer TWICE and paid them
over $300 to "guess" at this problem.  Anyone have
any insight or solutions as to why the "Check Gas Cap"
message keeps reappering?  Hell yes we've checked
2001 Ford Expedition Noise When Driving09 Nov 2006 16:48 GMT6
Starts and Idles fine.
When driving, there is slight vibration and sound that increases with
speed.
The best way I can describe the sound is that it sounds like I am
Static on AM Radio09 Nov 2006 16:46 GMT9
I'm getting static in my AM radio that I do not understand.
WITH THE ENGINE OFF
I can set the key to ACC and the radio works perfectly -- well, it works as
well as an AM radio can be expected to work. But, when I set the key to ON
tire rubs inner fender09 Nov 2006 03:49 GMT5
94 ranger 4X4 has 265 78 15 tires and thats the size door sticker says pass
side will rub inner fender when turned sharp,theres 3/4 inch differance
between left and right tire sitting straight, tire to inner fender,had front
end lined,
2007 F250 Questions08 Nov 2006 13:34 GMT2
I'm in process of buying a 2007 F250 4x4 standard cab and have a couple
questions:
1) Truck is standard with 16x7 wheels and 245/75/16 tires. Can someone
tell me how much larger tires will fit comfortably (ie. no contact with
Brake Line Corrosion08 Nov 2006 12:39 GMT16
The front brake lines on my 1994 F150 failed due to corrosion, as in rusting
and the one line was preforated from pitting corrosion.  The truck has
78,500 miles on it and we have mild mid-Atlantic winters.  The truck is not
driven much in snowy  winter.  The lines going to the ...
Problem solved: f250 brakes08 Nov 2006 03:52 GMT8
I found out the problem with my back brakes not engaging when pulling my
Travel Trailer (9K)
THE ADJUSTING STAR WAS PUT ON BACKWARDS.
That's right, it was installed so that the star had to be pushed *up* (from
Brakes F-25007 Nov 2006 23:14 GMT7
I did all the brakes, recently. However, while pulling my 9K trailer, it
seems all wasn't well.
The pedal went to the floor a bit too much. After pumping them once, they
braked better. I looked at the rear drums, and wondered if they had ben
Need to buy antenna for 1975 F15007 Nov 2006 14:56 GMT3
Any idea where I can get OEM or NOS antenna (and other parts) for my
1975 F150?  I've tried lmctrucks.com and jcwhitney.com and searched the
web for days with no luck.
Thanks
90 ford ranger07 Nov 2006 01:42 GMT3
I was driving along and my truck started bucking and backfiring in
the middle of rush hour traffic.  Luckily I made it to the right
shoulder just after a bridge but the engine would no longer start.
When I turn it over it sounds like the timing is off but i checked it
2000 Ford Ranger XLT Center Console06 Nov 2006 16:22 GMT1
The armrest for my center console has a plastic inner shell which is
screwed into the armrest attaches to the hinge. That shell has broken at
the hinge and no adhesive I can find seems to keep it together. Where
can I find a replacement, or should I try the manufacturer?
79 ford van05 Nov 2006 18:57 GMT3
i have this big old van and i am afraid the transmission went out. I have
had it for 4 plus years. It seemed to rev up and not really go like it
should, so i parked it. Just on time, because it wouldn't move after i
backed it in the driveway.
Shredder wheels05 Nov 2006 16:04 GMT12
Check out these wheels made by my son - as seen on Trick My Truck
http://www.flickr.com/photos/joearnold/
- - - - - - - - - - - - - - - - - - -
Easy's getting harder everyday
Pages: 1 2 3 4 5 6 October, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.