One reason why you never want the first model year of any new engine
design.
http://money.cnn.com/2007/03/21/news/companies/ford_recall.reut/index.htm?cnn=yes
-----------------

OK, I've got an 87 F150 with a 4.9L engine, 4 speed manual
transmission.  Lately, the sucker has been really hard to shift and I
mean really hard!  Does it have a hydraulic clutch or is there a
cable.  In either case is it possible to adjust it? If hydraulic, can

What mileage should the fluid, filter, etc. be changed in an AUTOMATIC
trans? Thanx

    I just bought a 2000 model, F350XL Superduty cab and chassis (regular
cab), V10, 4x4, dually, with the long frame (84" CA, 16?.?" WB). I am
trying to corroborate my numbers for the approximate curb weight of this
truck. Some local mechaincs keep insisting that this truck, as it ...

I am in serious trouble right now...I am in the middle of NH at a
friends house in the middle of the woods witha '92 F-150 Pickup
automatic custom w/towing pakage. The truck has been through 2
transmissions and transmission line leaks before..Its beena family

I put a 3 inch body lift in my 97 F-150 a few weeks ago and since then
it will not start right. I have to push the shifter all the way up
when its in park to get it to start, otherwise it just clicks and wont
start.  Now it wont even start when i do that it just clicks all the

Just had the front upper and lower ball joints on my '05 Excursion replaced
under warranty, at 33,200 miles. Took it in for an alignment and they said
the joints were bad. A friend who had a '00 Superduty diesel said he had the
same thing happen, they wore really fast. Only the ...

I have an 03 two wheel drive.  It has the top of the left hand front
tire leaned out by a degree or two.  It is wearing the outside edge
of the tire.  Toe is good.
Does this front end have adjustable camber?