| Thread | Last Post | Replies |
|
| Best Auto Repair Software / OBDII Code DB | 22 May 2007 16:45 GMT | 2 |
Best Auto Repair Software / OBDII Code DB Autotree Pro Ver. 1.45 is a 32 Bit ( WIN95-XP) software Application for automotive diagnostics. The program written in a Tree format to make systematic and quick diagnostic checks a breeze, organized by
|
| Was wondering clutch jumps | 22 May 2007 16:26 GMT | 6 |
Hi: was wondering why , F-350 dually,, with a load the clutch seems to be jumpy when I let it out,, no load not as bad, I know replacing the clutch and pres plate would be the obvious but I have a chev 4*4 that did do it for awhile but it came out of it,,,
|
| '86 F150 Major Update/fix-up | 22 May 2007 07:03 GMT | 12 |
I'm not normally on this NG, but I have some questions I'd like to ask folks who know more than me about this type of stuff. I have an '86 F150 with the 4.9L straight 6 and 4 on the floor (granny low for 1st). Nothing fancy here, just a work truck.
|
| F150 Rear Axle Ratio | 22 May 2007 07:00 GMT | 10 |
How can I determine the rear axle ratio on the '89 Ford F150 4x4. It is not on a label on the cover as someone said it should be. I have removed the cover, should I be able to count them?
|
| question for the group | 22 May 2007 03:32 GMT | 2 |
My brother is looking at a 01 Ford with the 5.4L engine. He asked me what the longevity of the Ford modular engines is expectd to be, and I don't know. So my questions are this, what is the expected longevity, what would the
|
| Both headlights out-update | 22 May 2007 03:21 GMT | 6 |
Wow, you got to love this group. 10 or so responses on headlight issues. However, no one answered my question as to where the headlight relay is and if the headlight switch has a circuit breaker builit in as in some vehicles.
|
| Both low beam headlights out | 21 May 2007 09:58 GMT | 16 |
Vehicle is a 93 Ford Ranger. My son visited me yesterday and mentioned that one of his headlights was out. Upon observing, I noted that both low beams were out. I removed one headlight bulb and sure enough, one of the filiments is broken. My son swears that he had one low ...
|
| 1988 F-250 speedometer issues | 20 May 2007 15:52 GMT | 2 |
The "buzzing" noise coming from my speedometer has gone from intermittent to constant, and the needle is beginning to bounce, so I'm assuming I have a cable issue and not a speedometer problem. The question is: How difficult is it to replace the speedometer cable? 4X4, 460, ...
|
| Jerky braking | 18 May 2007 17:54 GMT | 8 |
I have a 2003 F-150 4x4. Only 20,000 miles on it because it was in storage for a year and I either walk to work or take a bus. Periodically, I feel a pulsation or vibration in my brake pedal every time I stop, particularly when stopping from high speeds. But the brakes seem to
|
| '81 F-150 Steering problems | 18 May 2007 01:35 GMT | 2 |
After replacing the power steering pump because it was making noise and hard to steer at times, it seemed to be better for a couple of days . Then the pump started to groan again and as I was turning into a parking lot the steering just froze, couldn't turn right or left.
|
| Fuse description | 17 May 2007 17:39 GMT | 3 |
I have a 97 Ford F-150 and it doesn't have a manuel that tells me which fuses control the turn signals
|
| 1977 ford f250 400 v8 ignition timing | 17 May 2007 17:15 GMT | 3 |
Can someone tell me what the correct ignition timing is for my truck. I have read that its 4 btdc and 6, 8, 12, and 14. I have a 600 holley 4 barrel on it. Thanks, jimmy
|
| Ford F250 SD | 17 May 2007 04:29 GMT | 3 |
I have a 2000 F250 SD Lariat. It has the overhead console with the electronic display that shows direction, outside temp, mpg, etc...... It has quit working and I have checked everything. Ford wants $250.00 for a new one saying that I must buy the whole console. I would like
|
| 68 F-250 | 17 May 2007 03:13 GMT | 1 |
Had my 68 F-250 Cab destroyed by a falling tree! Still a good runner. Any known links that detail how to remove this cab, and what years of truck would work/fit in replacing it. I'm a mechanical idiot, so, I need some detail, can an idiot do it? Thanks
|
| 87 ford bronco2 clutch line | 16 May 2007 15:02 GMT | 8 |
I have an 87 bronco 2 with a 3" body lift. I just replaced the clutch. While putting everything back together I noticed the hydraulic clutch line is not long enough to put back into place no matter how hard I pull on it. What can I do?
|