I'm getting ready to convert my 1988 F-250 from a Styleside to a flatbed.  I
just realized that since the gas fillers are built into the sheet metal, I
need a couple of (since it is dual tanks) new gas tank fill hoses with gas
caps that are designed to work with flatbeds.  I ...

Howdy...I have a 1966 Ford F-100 with a stock 352 ci motor and a stock 3
speed stick tranny. I only get about 15 mpg and want more mileage. I
will never tow anything with it so I'm thinking of installing a 302 ci
motor along with a few mileage improvement goodies.

Hi.......
I have a question about how to measure an MAP sensor on this wehicle with an
DVOM.
It is tree wires into it, and one is ground an one is bout 5v DC. Exactly

I have a 1994 ranger 2.3LAbout 2 weeks ago while I was driving it
started runing real rough and sound like a small motorcycle but quit
after about 20 sec and started running normaly, it did it again about
a week later lasting only a few seconds. nows does it after driving a

McTruck: 1999 Ranger 4x4 Supercab XL "Sport" 3.0L Flex-Fuel 5-
spd. (low use, only 32K mi.)
Symptoms: engine coughs and dies a couple times, then dies for good.  
(Many tanks ago, made the mistake of gassing up while tanker truck

Son wanted to replace motor in his truck (he is my stepson) with a motor
from the junkyard to get the truck on the road faster.
The motor we received came out of a van, no idea what year, but it is a 5.0L
motor.

I got a killer deal on a 1980 F-150 4WD, 4" Lift, Aftermarket suspension,
blah blah blah. Truck is in great shape, needs paint, but no rust, newer
tires etc., Gave a grand for it, knowing it had trans problems. No 5th or
reverse. Tore apart the tail end, needs synchro... no big ...