Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Trucks / August 2007

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
1999 F-25031 Aug 2007 17:20 GMT4
Recently in the early morning (3am) my horn went off with
no one in the truck.  I don't have a alarm system, and when I got out to the
truck the horn quit.  But now the horn does not work at all, and my question
is where the heck is the horn on this truck.  I looked all over the ...
google search - sticky pedal update...31 Aug 2007 17:18 GMT4
I'd like to thank everyone who took the time to respond, and to those who
suggested it was the throttle body blades sticking, you nailed it dead.
I gave it a cleaning...with the help of my daughter who was able to fit her
hands in there a little better than I, and take off is now ...
ford, 1992-2004 speed control recall..30 Aug 2007 18:35 GMT1
...an apparent fire risk to be fixed by the installation of a fusible
link...I got my letter yesterday.
Used vehicle buyers may wish to investigate. Recall #05s28....the dealer can
tell you by your VIN if repair is needed.
Lowering My Truck27 Aug 2007 06:33 GMT8
I own a 1960 Ford F-100.
I am looking for a low cost way to lower the car (both front and rear)
- what is the best way?
Also - what is the smallest tires I can put on the front and largest
who makes the Motorcraft oils?27 Aug 2007 05:01 GMT5
I was wondering if anyone know who blends and packages the Motorcraft oils?
The one I am most interested in is the 15w40 they bottle for the diesels.
skimmer
Replacing Water Pump on 99 4 cyl Ranger - How difficult is it?26 Aug 2007 07:42 GMT1
Water pump is leaking. Is this a do it yourself job? Or better left to a
Pro? Anyone tackle this project before? Any tips if I decide to do it
myself.
Thanks, Ken
Speed sensor24 Aug 2007 15:17 GMT3
I have a 1999 F-250 with a 7.3l turbo.  I need to know where the speed
sensor is located on this truck.  I know it
is on the transmission, but exactly where?
Ford Ranger shift knob removal24 Aug 2007 02:27 GMT7
I have a 2005 Ranger and this morning I was looking at how to remove
the 5 speed shift knob, but was not able to figure it out. I want to
add a cue ball like I have on my Mustang.
Lincoln Navigator23 Aug 2007 15:21 GMT3
I'm thinking about buying a used one, '99 up to around '05. Haven't decided
on what year yet.
Anyone know of any good year / bad year, what year to stay away from and
that sort of thing?
98' B4000..easy to replace the rear shocks ??22 Aug 2007 18:24 GMT2
I have the Haynes manual and it looks fairly easy...anything to watch
out for when doing ?
Transmission Shifting Issues22 Aug 2007 16:38 GMT4
I have been out of town and my son says the transmission on my 2000
F150 Ford truck sometimes will not shift properly. It will run up to
4000 rpm's, and will not shift until letting off the gas a little. The
fluid seems fine. What is the likely problem?
1983 Ford Ranger, 2.3 4 cyl, 5 speed manual22 Aug 2007 13:14 GMT3
Not a bad little truck for the year. I've got 2 issues I hope someone
can help with.
First is the bad fuel economy. I'm lucky to get 19-20 mpg on the
highway and 14-15 mpg in city. Tire pressue is fine, all fluids, belts
Programming key fobs21 Aug 2007 02:57 GMT4
Anyone know the procedure for programming a couple new key fobs on an '01
Navigator?
Should be the same as the Expedition,  '98 to 2002.
Thanks in advance,
I did a google groups search....20 Aug 2007 03:45 GMT6
And couldn't find where this problem had been addresses before...
2000 E-150 van... the gas pedal is hard to push...it sticks when taking off
so you have to kind of tap it a little...to get going, it's fine once you
are moving...
pressure bleeder adapter?19 Aug 2007 21:01 GMT6
does anyone make a pressure bleeder adapter for the master cylinder
reservoir on my '93 F-150?  If so, where can I buy it?
thanks,
nate
Pages: 1 2 3 July, 2007
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.