Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Trucks / July 2008

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
2006 Expidition brake issue30 Jul 2008 22:22 GMT2
I was drving home on an expressway last night and my car starting
making a clicking noise while going 70 miles an hour. The brake pedal
built up pressure until it became extremely stiff. Once I applied the
brakes the pressure let off and clicking noise stopped for around 3-4
Ranger Gone ???30 Jul 2008 15:27 GMT4
Is the Ford Ranger really gone after this year?  Is anybody else still
making a compact truck?
Flah of genius movie29 Jul 2008 10:32 GMT1
http://www.youtube.com/watch?v=Cv-8FSGiOlQ
94 ranger xlt: Brake fluid from box under truck on the frame.25 Jul 2008 18:39 GMT2
Any one know what this box could be that is sitting on the frame rail
under the driver side of my 94 ranger. It is brake related because it
has brake lines running in and out of each side, maybe a pressure
regulator or someting.I want to replace it but dont know what to ask
1988 E-150 van slider door part24 Jul 2008 22:26 GMT1
I have a 1988 E-150 van and the slider went off track and a plastic
part broke off. I'm unsure of which part it is. I was wondering if
anybody had a list of the parts, or a visual parts reference for the
slider so I could figure out which part it is I need to order to
1986 f-150 4x4 cab mount question.24 Jul 2008 03:43 GMT3
i think i may have a broken cab mount on my truck. everytime i go over
uneven ground i hear a pop type noise comeing from under drivers side
cab floor. my question is. is it possible to change cab mounts without
removing the cab of the truck? maybe unbolt the mount and raise the cab
No sound out of the speakers.24 Jul 2008 02:13 GMT2
Group,
No sound out of the speakers.
95 F350 diesel.  The radio and the CD works, can select stations, tracks,
volume, balance, fade all are adjustable but no sound.  I swapped the radio
f.ck House Republicans up the a.s with a roll of barbed wire23 Jul 2008 15:55 GMT10
As if this wasn't bad enough --
The House had a meltdown today in the middle of the memorial service
for the late Rep. Tom Lantos, a Holocaust survivor who was chairman of
the House Foreign Affairs Committee. The service, in the Capitol's
replace 1986 F150 seal beam headlights?17 Jul 2008 20:47 GMT1
Anyone changed from the OEM seal beam headlights to a better removable
lamp headlight?
Anyone tried these?
http://www.k2motor.com/lhp-7x6-k.html
SRS Flash codes for 2002 Ranger16 Jul 2008 07:58 GMT3
Howdy,
I have a 2002 Ford Ranger which is flashing error codes with the SRS light.
I think it is either 64 or 46.  What do these mean?  Are they easily
fixable?
92 Ranger timing belt problem11 Jul 2008 15:48 GMT1
My 92 Ranger began running rough, hard to start, very little torque,
and getting worse as I drove it.  I checked the fuel filter and put in
new plugs and wires, but this didn't help.  I over-heated the clutch
getting it to the repair shop, where they told me that the timing belt
First E85 and check engine light stays on...11 Jul 2008 05:37 GMT11
Hello Group
Here's the deal. I owna 2007 Sport trac, about 85k miles on it (just
to and from work). On the 26th of this month they had the first E85
station open in Massachusetts and I was the 2nd in line to get it. for
Changing Oil in 2001 Ford Ranger10 Jul 2008 20:09 GMT4
What all do I need to change the oil? This is my WAG:
Oil Filter
(4) Quarts of Oil (What Grade?)
Oil Catch Pan
Upper Main Bearing insertion tool?07 Jul 2008 21:24 GMT4
I am putting new bearings in an '89 E-150 w/351-W, with the engine in the
vehicle. (Engine raised up, wooden blocks under front mounts, pivoting on
rear mount)
I can get the upper main bearing inserts out, using a re-formed cotter pin
Ranger airbag code 2507 Jul 2008 21:24 GMT3
I have a 98 Ranger blinking airbag code 25.  I understand that that
message indicates that there is a Pass Air Bag Deactivation (PAD)
Switch Fault.  My question is: with this fault, is my passenger airbag
activated or deactivated.  When my wife goes to her part time job, I
Pages: 1 2 June, 2008
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.