I have a 2002 Ranger 4x4 V6-208 HP with 37k miles on it.  The original
stock "Wrangler" radials will need replacing soon.
I live near Indianapolis, so tires that give acceptable ice/snow
performance are in order.  I do mostly suburban city driving,

I have a small problem with removing the steering wheel cover so I can
repair the cruise controler (3 button controler on right of the steering
wheel). The 2 tabs are broken that hold the small 3 button console on. In
order to replace this I will have to remove the cover over the ...

Hi, I have a friend that has a 95 F150 and the serpentine belt is
squealing. I don't know to much about Fords but I think there must be a
way to put more tension on the belt.I saw a hex head bolt on the pulley
that is spring loaded. Is that the adjustment and what way do you turn

Hey everyone just asking if anyone knows much about a 91 ford f250, it
has 250000 kms on it and has had about $4000 spent on it in the last
year and a bit includeing new exhaust from the motor back and new
rebuilt tranny. Just looking for one to tow my camper and haul around

My brother has a '94 Bronco, and the right side tire is shaking as he drives
it. Under some conditions, the tire can make contact with the bumper, but at
other times it will clear the bumper by about a quarter inch. (The tires are
oversize, so the tight fit is expected, but the ...

Howdy,
Ford 2003 F250 with 6.0 diesel leaks anti-freeze when cold. Looks like
it's coming from the back of the engine by the block. Can sit for days
without being operated, and then just starts to leak. Had it into Ford

What tool do I need to get the differential filler plug off ?
Thanks
97 Ranger 2.3l

Hey all.  Pulling the charging system outa my '84 F100 doner truck to
transfer it over to my '61.  Got a couple of wires I'm not sure of where I
need to go with 'em.
Anybody got a wiring diagram of the charging system for an '84 F-100?

I am coming up on a new clutch in my 96 Ranger, and am having
difficulty trying to find out how to bleed the slave cylinder. I
intend to install everything new while I have the transmission out for
the clutch replacement, including the clutch disc, pressure plate,