| Thread | Last Post | Replies |
|
| Oil/ Antifreeze problem | 05 Apr 2004 14:05 GMT | 7 |
We've got a '97 Windstar 3.8L, that we're told, has a problem with antifreeze and oil mixing. It's oil getting into the antifreeze and antifreeze getting into the oil. I'm familiar with antifreeze blowing past a bad head gasket but the part about oil getting into the antifreeze is a ...
|
| Running like %$#%#%# | 05 Apr 2004 04:22 GMT | 3 |
My 1990 Aerostar (the type with the larger engine) was running great, Nice and smooth, good MPG, peppy as they get. Has been well maintained. Then it needed an new alternator. Still ran fine other than the things that a dead
|
| 1993 Probe | 05 Apr 2004 01:40 GMT | 1 |
I got a probe as a project and I am working on the clutch at the moment, the pedal when is depress sometime stays down ( replaced the slave cylinder and bleed the system), also when the clutch is depress the car will sometimes still have the clutch not engage. Any suggestions?
|
| 93 Taurus, GL | 05 Apr 2004 01:13 GMT | 7 |
i got a 93 taurus GL, 3.0 had it since new.... well after 11 years of sitting in it the drivers seat seems like you sitting in a bucket.. i got a bad back, surgery since 1964, and i want to know if you can take the car to an upostery shop and they will be
|
| mint 1965 Ford Mustang Car for sale, $1,500 | 04 Apr 2004 23:05 GMT | 4 |
1965 Ford Mustang Car for sale, $1,500 This is one of the first classic Mustangs made. It has an 6 cylinder motor. It has a straight body, and is in sound running condition. Immaculate pony interior, and good tires.
|
| 95 Ford Windstar break question. | 04 Apr 2004 23:05 GMT | 2 |
Does a 95 Ford Windstar have disk or drum brakes on the rear? Thanks for your help. Thanks for your help. Gene
|
| 5.0 vs. 5.0 H.O. | 04 Apr 2004 18:35 GMT | 8 |
Anyone know what the difference is between these two motors? I'm asking since I have a Merc Grand Marquis 5.0 to put in my 1966 Mustang. I bought the Merc thinking the 5.0 was a high performance engine, but it isn't "High Output." Runs well though.
|
| ? Info: Switching gas brands, midwest | 04 Apr 2004 08:08 GMT | 9 |
I've run nothing but Speedway / Marathon / Pilot for the last ten years and have had good luck with it... absolutely NO fuel system problems.. injectors stay clean and no sludge in filters. BUT.. that supplier uses 10% Ethanol
|
| Tranny trouble on my 1988 Ford Bronco II | 04 Apr 2004 07:40 GMT | 1 |
Can anybody explain to me why my transmission would be slipping? My Bronco is an automatic transmission. I always have to shift gears manually for some reason. Once the car is put into drive it does not want to stay. If anyone could help me out, I would appreciate it.
|
| Sable not firing on all cylinders sometimes | 04 Apr 2004 04:41 GMT | 5 |
My Sable is sometimes not firing on all cylinders. It never stop, but it could go with idle so low that charging light would start blinking. It is happening after driving for 15 miles (from work), stop for 15 minutes in day care, starting and driving 200 feet to first
|
| Powersteering oil?????? | 04 Apr 2004 03:56 GMT | 2 |
Hi all of you...... What kind of oil would you recommend to use in the power steering on a E150 1988 302 EFI? I Use Dexron III automatic transmission oil syntetic, but I think it is kind
|
| Metric or U.S. standard tools for 96 Escort? | 03 Apr 2004 19:41 GMT | 3 |
I just bought an 96 Escort and am going to buy a set of tools for it. What kind of tools I should buy? Metric or US standard? Someone told me that I should buy both because it is a US car used some Mazida parts, is that correct and necessary?
|
| Escort MK 1 | 03 Apr 2004 14:34 GMT | 1 |
Does anyone know about a newsgroup that is discussing these cars. Lars Th Skahjem Norway
|
| Emissions | 03 Apr 2004 05:16 GMT | 4 |
Well the ole ford passed. I put a new air pump on with my homemade brackets.:) I put on a new stock 1bbl carb and it passed with flying colors. Thanks to those that helped.
|
| 93 Taurus noise from front right side | 03 Apr 2004 03:34 GMT | 3 |
My Taurus has developed an odd noise from front right side. When turning sterring wheel, while either moving or stopped, a loud noise, which sounds like its comming thru the firewall develops. I replaced the plastic bearing on top of the strut assembly, thinking that was the ...
|