Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Cars / July 2004

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
FA FE Big Block heads07 Jul 2004 08:09 GMT3
Might only be good for cores, might be able to be rebuilt.  You judge.  
Came with a 1965 manifold, so they might all be '65.  One exhaust manifold
still attached.  Just want someone who can use them to have them- 5.00
starting bid, no reserve-
FA 1965 FE Big Block Manifold07 Jul 2004 04:44 GMT2
Probably came from a 390, might fit other FE big blocks.  This would be
nice if you are restoring a '65 390 and want a year correct manifold.  5.00
opening bid, no reserve-
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7909336603
Exhaust system questions07 Jul 2004 02:04 GMT3
motor is running great! have my timing and fuel system working great.
63 fairlane, 302 size small block ford motor.
question - exhaust ilet pipes, from exhaust manifolds back -
any one know if I can use an inlet/h-pipe from a mustang in the
96 ford contour/ 5 speed 07 Jul 2004 01:06 GMT2
Need help removing the alternator, can anyone give me any advice on how to
go about doing this?
Distributor Won't Go in, 351M Ford07 Jul 2004 00:27 GMT14
I have a 351M Ford truck engine.
I'm replacing the distributor* (which is the one vacuum-advance type). I
removed the old distributor, and now I'm trying to insert the new one.
That's the problem. The new one won't go in. And I can't even re-insert
1999 Taurus Transmission Problem (First to Second Gear Shifting)06 Jul 2004 23:56 GMT1
All,
    I wanted to know if there is anything I can do about my 1999
Taurus shifting from 1st to 2nd gear erratically after it warms up or
is driven for more then 15 miles? Is there anything Ford has out there
2002 Taurus transmission fluid change - how much?06 Jul 2004 22:37 GMT2
I'm doing my first transmission filter and fluid change. How much fluid
will I need to refil after changing?
Thanks,
Doug W.
'96 Sable service engine light related to fuel level06 Jul 2004 20:35 GMT3
I have a 1996 Sable.
The "service engine soon light" has been coming on and it is related
to fuel level.
It will come on when the fuel level drops to about half a tank and go
1997 contour won't turn06 Jul 2004 16:26 GMT1
My 1997 duratec 3.0 with 120,000 miles would not turn over.charged
battery,no luck.Tried by hand ,again no luck.Help! Need ideas.Thanks where
are you MR. Moat?
Windsheild washer spray adjustment06 Jul 2004 12:52 GMT8
I drove my daughters '97 Taurus G the other day and noticed the windshield
washer spray was just trickling out. A check under the hood revealed a
rotted hose from the hood fittings to the washer tank. I replaced this with
the appropriate dealer part and tried it out.
Amsoil06 Jul 2004 07:51 GMT41
Anyone using Amsoil?  I am about to change over to Amsoil oil and their filters
in all my cars - '04 Lincoln LS, '04 Ford Escape, '98 Mercury Mountaineer, and
'98 Contour.
Current plan is to use the 5W20 XL7500 series in the two new cars and change at
Distributor Cap Wiring06 Jul 2004 03:26 GMT4
I have found 2 distributor cap wiring diagrams (see below) for a 1993
Mustang 5.0?
Block   |         Cap Dia. 1        |       Cap Dia. 2
-------------------------------------------------
Crown Victoria/Grand Marquis05 Jul 2004 23:39 GMT5
Can anyone tell me how the fuel economy is on the newer Crown Vic? The
sticker says 25 on the highway. I currently commute in a 90 Le Sabre with
175K miles. I'm getting worried that I might end up on the side of the road.
I like full sized cars but want to know how MPG I should ...
Cam question -Opinions please05 Jul 2004 22:06 GMT4
I am looking for some hard facts, some experience based opinions, and
even some myths.
302 rebuild.  Roller cam or not? Solid or hydraulic roller? or solid or
hydraullic non-roller?
Mondeo Problems ets05 Jul 2004 20:36 GMT9
Thinking of buying a hatchback, the Mondeo looks attractive but would
welcome any positive  or negative points from owners.
Any particular engine to avoid?
Any particular model to wish for?
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 June, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.