Brother-in-law has a '84 ford ranger (attempting to restore).  Right at 300k
on it and the transmission is out. It's has a 2.8 ci V-6, C-5 auto, 4 wheel
drive.  During the process of removing the transmission or during use in the
fields the kickdown lever between the carburetor ...

I am giving serious consideration to buying a new Freestyle.  My concerns
are as follows:
1.  I heard that the Duratec 3.0s in some Escapes are having problems around
the rod/crank bearing area.  Is this really true?  And if so, does it affect

My passenger side mirror has broken off. I have a '97 Taurus... This
mirror is the electronic kind. I have very little money to spend. It
appears that the few bolts broke off and a few pieces of the plastic
on the inside portion of the mirror. Do you think that I can just

I need one. Any color, I will paint. Replies remove nospam
John

   I'm still having trouble with my wife's fiesta, I thought that it could
have been the fuel cut off switch acting up. But the car has been running
fine for a few days then it stalled whilst pulling out of the drive and
won't start again.

94 Ford with 1.9L engine load tap/bang when cold only-what can I to do?
I had this car (1994 Ford Escort) for two months and now that the temperatures
are around the 40's the 1.9L engine (at least it sounds like it is coming from
inside the engine) is tapping when the engine is cold ...

HIYA I WORK WIV A FLEET OF TRANSITS (2000 MY ONWARDS) AN THEY SEEM TO HAVE
DEVELOPED AN ELECTRICAL FAULT:-
THE WIPERS,HEATER FAN, BRAKE LIGHTS AND REVERSE LIGHTS ALL WORK WITH THE
IGNITION OFF....

I have the chance to pick up four brand new  wheels for a Ford Ranger 4X4. My
neighboor had a 95 Ranger, he bought the ford wheels and never put them one, he
then sold the truck. He found them still in the box behind. They are alloys. I
have another buddy that has an 05 Ranger. I ...

Bought a new 2005 escape, it had a hood deflector on it. I was getting wind
noise from it. Dealership hasn't had anyone else with this problem.
Anyone help me out ?

i have a bronco II 1987 , that i can engage the 4 x 4 from inside the truck
, with a ceeling control that has a low traction to . My problem is that
when i engage the 4 x 4 , i have a spinning / grinding noise comming from
the front driver side wheel when i push on the gas , and ...

I wonder if anyone can help me please? My Father ownes a 1995 Ford Escort which
has developed a fault with the central locking. It is impossible to get into
any of the doors except the boot(Trunk). I did manage to open the door from
inside , but this sent the cental locking into a ...

How do I remove the back seat and how do I remove the head rests?
Thanks!!!!
PS.  I'll be putting the headrests back on but I want to wire some
neon's first.

I need to remove the pulley from the P/S pump so that I can replace the
pump mounting bolt that backed out. My question is, is it just press fit requiring
only a stout puller or is it threaded/keyed/locked/etc.? I notice that the shaft
is allen keyed but figure it's most likely ...

Do you guys hate it when a defensive back makes a fine play and the
out-of-position official calls pass interference instead? I sure do
and in the NFL the consequences are catastrophic. Neither incidental
contact nor great defense should be a 46-yard penalty but under

I have a '91 Taurus.  I have pretty good heat.  Unfortunately, along
with the heat comes what I believe are exhaust fumes.  When the car is
moving, I don't get the fumes. But, if I stop for a light and the car
is sitting, the car starts filling with fumes.  If the light is long,