Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Cars / March 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Transmission Problems Ford Aerostar22 Mar 2005 02:48 GMT5
I have a 1990 Ford Aerostar with a v6 engine, rear wheel drive. When I first
start it I cannot get it to move. Once the engine is warmed up I do not have
any problems with it. Appears to only be when it is cold. Any help would be
greatly appreciated. Thanks
93 Sable Electrical22 Mar 2005 01:34 GMT6
           Hi Guys
   Ive got a ground on my electrical system for the above car . Its in the
60A headlamp cct and after having it in the garage for a week thats all they
can tell me. Does anyone know where to get a good electrical drawing for the
W Reg Mondeo Air Con21 Mar 2005 21:53 GMT2
Does anyone know of an extra fuse that that may be hidden somewhere
stopping my air con working on my Ford Mondeo Estate 2l petrol?
When I press the Air Con switch, the light comes on but that's it.
Or could it be something more sinister (Expensive)?
ford motors21 Mar 2005 19:34 GMT3
Will the motor from a 1996 ford escort work in a 1995 ford ranger
Mercury Grand Marquis 96 - keyless entry pad21 Mar 2005 14:24 GMT8
How do I reset the code on the keyless entry pad (door code lock)? The
previous owner didn't know the code so I need to reprogram it. (Mercury
Grand Marquis 96 LS/Bayshore)
1998 Ford taurus- check engine light21 Mar 2005 04:50 GMT8
I have some bad news abuot my car. The check engine light came on about 3
days ago and I had no symptoms, the Car drove and rode fine. Nothing changed
Now the engine is over heating and the anti-freeze looks like chocolate
milk. THats a really bad sign. Someone told me the Block ...
important   TIRE PRESSURE  dont do a JEFF21 Mar 2005 04:45 GMT9
On Thu, 17 Mar 2005 18:57:21 -0500, "Jeff" <kidsdoc2000@hotmail.com>
wrote:

>"Petey the Wonder Dog" <baldycotton2@mchsi.comedy> wrote in message
picnose try this at home21 Mar 2005 04:42 GMT18
On Thu, 17 Mar 2005 22:22:41 -0500, "pick one" <try again!> wrote:

><barney rubble@sky.com> wrote in message
>news:hohk31pa6d7q45uqv5pm3tsno05n07p7c5@4ax.com...
picknose gets lesson in effieciency21 Mar 2005 04:36 GMT11
On Thu, 17 Mar 2005 23:14:33 -0500, "pick one" <try again!> wrote:

><barney rubble@sky.com> wrote in message
>news:m5kk31hnb88htio9uv4ke827gsa110qtv1@4ax.com...
slfordteck admitts to not following tire pressures21 Mar 2005 03:06 GMT1
On Sun, 20 Mar 2005 21:00:01 GMT, "Jim Warman"
<mechanic@tenalpsulet.net> wrote:
>There is a caveate on using the door sticker. There are a lot of Explorers
>out there with 26 psi front and rear marked on the sticker. IIRC, updated
Pics of the 2005 Mustang with a 1970 Mach 120 Mar 2005 20:05 GMT15
I took some pics at the local Ford dealer - the new 2005 Mustangs with
my 1970 Mustang Mach 1 in the mix.
Pics are @ http://community.webshots.com/album/298509522SJtaqi
Yet another $.02 worth from a proud owner of a 1970 Mach 1 351C @
resetting door codes for ford F15020 Mar 2005 19:07 GMT1
I recently purchased a 2002 F150 Lariat that only had one key, one remote
entry, and coded entry on driver's door and no vehicle manual.  Is there a
way to reset the door code and program a new code?
Which model(s)???20 Mar 2005 17:41 GMT3
I have a 93 Ford Mustang GT...
Using on-line and in-print changeover manuals, I can determine which model
years have the same parts as my 93, but...
How can I determine which other models have the same parts???
Very nice Xklusive Grille in eBay20 Mar 2005 17:13 GMT1
I have very nice Xklusive Grille in eBay, some items in auction, please
visit my ebay store at
http://stores.ebay.com/xgrille
or
Slip Yoke19 Mar 2005 21:12 GMT9
Here is a quicky...
What lubricant do you use on the exterior surface of the slip yoke?
TIA!
Steve
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 February, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.