So, what's it like changing the front motor mount on 89 sable 3.0 ?    Is it
just disconnect the right side dampner jack the engine and the mount should
come right out ?   Where is the best place to jack the engine up ?   The
book says to jack it up on the oil pan, I don't like ...

I have a 89 taurus 3.8,  the probelm is in the front end the passager
side.  when i make a sudden stop or if i hit a bump the car makes a
thunking noise like an inner tie rod will do. the thing is i replaced
both inner and outer tie rod ends,  the same with my brakes and new

My mum has a Ford Fiesta and it has a scratch on the bumper she wants to get
rid of it using whatever they have in Halfords or whatever, but the problem
knowing the excat colour. As on the Reg Certificate it says blue, but its
more of a purple-blue, is there any way of knowing the ...

First things first:  I am *not* a mechanic.  Not even close.  I know where
to put the gas in the tank and everything after that is pure guesswork on
my part.  I *did* however manage to replace the power steering line on my
wife's 1990 Taurus Wagon with the 3.0L V6.

Doing my first spring hand-wash last weekend, I noticed a ton of grease
flown up around the front passenger side wheel well. Checking, the CV boot
is cracked. I'd planned on getting a new boot and doing the job next week,
but the joint started making noise today, so i need to get ...

I have a 1983 Ford 460 engine and it has sat for over 9 years now and when
starting it a few valves have been sticking is there some type of an oil
treatment I can use to fix this problem I had douched the pistons before
starting it with WD -40 I live in Arizona where there is ...

my cooling fan is not working and i already tried the censor and a new
motor for the fan need help

Yesterday I stopped by the dealership and talked with one of the lead
mechanics about my 93 Explorer.  What I talked to him about was that me and
a friend pulled the left cylender head off of the Explorer to find a 0.5" x
0.25" hole in the exhaust valve with a crack developing ...

Hi - thinking about buying an older Ford F-150/250 truck - 88 to 92
vintage - and they all seem to be leaking/blowing oil out of the top of
the block/valve cover gasket and the hose that leads from the driver's
side valve cover to the air filter box.  Someone said that there is a ...

My 97 Taurus 3.0 Vulcan is pinging under load. No codes, no Check Engine
light, idle seems to be slightly rough with the warmer weather. I use good
gas always from the same station.
I did plugs, wires, and all filters about 9 months ago (~8,000 miles), and

I'm thinking of buying a late model used Ranger.  I want 2 wheel
drive... the models I'm looking at all have the annoying "butt-high"
look.. the rear is higher than the front end.
Can the front end be easily lifted to match the rear height? Don't

I have the original tape player in my '93 Aeroster. All the lighted
buttons quit lighting up. Other than that everything works fine. It's
just hard to see the buttons at night now. Can this be fixed?
Matt

Good evening all,
Well, I finally got it.  Here I am, only 27, and found a nice '63
Galaxie Fastback at Cars @ Carlisle a few weeks ago.  This is the exact
make/model/year I wanted, and sure enough I lucked out and found a nice

My 2001 Escape has had the airbag warning light on continuously for the
past two days. What do I look for to remedy this problem??

you claim to be a diesel guy
and yet you recommend to mix oils
lmfao
you failed year 4