Ford - all Ford cars

Thread preview

Thread	Last Post	Replies

97 Ford Taurus Catalyst Codes P0430 P0156	06 May 2005 04:39 GMT	1
Ford 3.0L Vulcan engine, CARB standards. 118000 miles, elevation 5000 ft. I have been running for some time with a P0430 code (Bank 2 catalyst efficiency below threshold), with no apparent degradation of engine
Bumper hitch towing capacity	06 May 2005 02:59 GMT	3
I recently lost my tow vehicle in an auto accident and haven't replaced it yet (It was a week after I purchased a new family car). I need to move my '87 Coleman Chesapeake 2 miles to a storage facility for a month or two while renovations are done to my house.
another warman o2 theory lmfao	06 May 2005 01:28 GMT	3
>Let's take a look at your misfire - sometimes with a backfire and that makes >me want to say ignition... Somewhere, somehow a mixture is being lit at the >wrong time or unburned fuel is getting into the exhaust and lighting off. >One thing that an ignition misfire will deliver on ...
again tom give USELESS advice	05 May 2005 22:05 GMT	4
On Wed, 4 May 2005 17:00:04 -0400, "tom" <tjctransport@optonline.net> wrote: >the clutch switch is most likely bad or out of adjustment. see if you can >move it a bit closer to the clutch arm. I had to do this every few months on
code set parameters	05 May 2005 19:01 GMT	4
Is there an an online site that lists obd11 code set parameters for Ford? thanks
Owners Manual leaves out the AX4N	05 May 2005 18:23 GMT	7
I have the 2002 Taurus SEL with the DURATEC and the AX4N Transaxle. The owners manual leaves out the AX4N for scheduled regular fluid changes. The manual says to flush the fluid on the AX4S Transaxles every 30,000 miles.
'95 3.0 Taurus TPS settings?	05 May 2005 12:20 GMT	1
Does anyone here know the correct idle setting, I set it to .98 volts but I'm not sure if that's what it should be. If anyone has a factory service manual I would appreciate it. Thanks. Tom.
1996 Lincoln Town Car Bolt Pattern	05 May 2005 10:23 GMT	2
got an 1996 Lincoln TC Signature and like to have an extra set of rims. Problem is how do i messure the bolt pattern ? Found 2 diffrent (5lug/ 114.3mm and 5lug/139.7mm) any help welcome
Guess you win Hurc...	05 May 2005 05:59 GMT	8
But you are a real looser Hey Hurc: I have decided to blow off this newsgroup because I'm tired of viewing your posts. You think 911 was a blast? You are a real piece of sh.t. Keep it up, you will eventually pay for your remarks. There
Clutch/starter interlock switch	05 May 2005 05:26 GMT	6
I have previously posted about my 1991 Explorer having problems starting and to the best of my diagnosis and from what I've read in the "Haynes Repair Manual", the problem is being caused by my clutch/starter interlock switch. I have called a Automotive Parts store and found out ...
here tom u said u never said this lmfao	05 May 2005 03:57 GMT	2
On Tue, 12 Apr 2005 18:27:04 -0400, "tom" <tjctransport@optonline.net> wrote: >????????????? >wtf are you typing about a.shole???
need advice	05 May 2005 00:03 GMT	1
On Wed, 4 May 2005 16:42:47 -0400, "tom" <tjctransport@optonline.net> wrote: >if you have not noticed from other posts, everyone here regards the thing >who signs as hurc as the village idiot, and as such, ignores everything he
88TB Coolant Question	04 May 2005 23:59 GMT	3
Just had my radiator replaced on my daily driver car. Now the temp gauge is running right of center. Not extreme, but not like before the change of the radiator. Radiator shop stated they flushed the system, (I wasn't present), then added new coolant. I did return to the shop ...
Decent Jack for 99 Grand Marquis	04 May 2005 21:58 GMT	7
I have a 99 Grand Marquis. I tried jacking it up the other day to rotate my tires. I have a hydaulic floor jack that I got from AutoZone. This is a piece of junk made in China. Anyway, I have a couple of issues here:
1991Explorer Stock AM/FM/Cassette Radio...	04 May 2005 21:55 GMT	2
Does any one know how to set the stations on a stock radio in my 1991 Explorer. I have tried several attempts to set teh station buttons, but have not found the corect buttons to press to make the 1-5 station buttons to hold the stations I want them to. If you have any way of ...