| Thread | Last Post | Replies |
|
| 1996 Ford Taurus Problems | 15 May 2005 09:12 GMT | 21 |
Two weeks ago i had camshaft position sensor and synchronizer replaced. Now the car is acting the same way it did before i had it replaced but its not the above again. When the car is cool it runs fine as soon as it is warmed up about 25 minutes of driving it acts up it cuts ...
|
| A/C question | 15 May 2005 08:48 GMT | 1 |
My A/C only blows cold on HIGH, if I turn the A/C below high the A/C bearly blows at all if the car is moving. If I sit still with the A/C on anything other than HIGH it will not blow. What can I do to fix this?
|
| STILL STUMPED: 91' F150 .302 | 15 May 2005 04:43 GMT | 4 |
This stupid truck of mine still doesn't want to run. I have tested fuel pump, tests perfectly and rock solid. IAC appears to function normally and be in order. The truck idles perfectly, engages into gear with no trouble, but when you
|
| Pulsating Brakes? | 15 May 2005 04:12 GMT | 17 |
I have a 99 Grand Marquis with about 150,000 miles. Great car, the engine has never been tuned up; doesn't appear to need it. I have had some front end problems recently. Anyway, I noticed that the brakes pulsate. I took of the wheels and
|
| 99 Taurus SE | 15 May 2005 03:39 GMT | 5 |
I have a 99 Taurus SE with a 3.0L Vulcan, E-ignition, AXODE trans, A-L brakes. Does anyone know why the engine will "race" when shifted from D to P?
|
| door keyfob | 15 May 2005 02:16 GMT | 2 |
where do I the code for key pad on 1997 ford explorer
 Signature Posted using the http://www.autoforumz.com interface, at author's request Articles individually checked for conformance to usenet standards
|
| 1995 Windstar | 15 May 2005 01:56 GMT | 2 |
Where is the cruise control box located. When the vehicle is jacked up the wheels rotate with cruise control engaged. They stop turning when the car is lowered.
|
| retards dripping oil and water contamination | 15 May 2005 00:49 GMT | 1 |
On 13 May 2005 18:17:56 -0700, eastwardbound2003@yahoo.com wrote:
>Nah, I really don't like how everyone has to have several motorized >vehicles. Several motorcycles I don't mind though but I have seen so >many go way overboard with cars and trucks. |
| tom gets a brake lesson | 14 May 2005 23:30 GMT | 8 |
On Fri, 13 May 2005 16:17:22 -0400, "tom" <tjctransport@optonline.net> wrote:
>yes, your pulsing in the brakes is most likely caused by warped rotors. the >reason these are considered "disposable" rotors is because the are cheap |
| Mustang 98 Rear Pad Replacement | 14 May 2005 23:17 GMT | 1 |
Have a 98 Mustang GT V8 and attempted to replace the rear disk break pads. Having trouble compressing the caliper piston to make way for the new pads.
|
| 2002 escort sputters | 14 May 2005 19:17 GMT | 2 |
Hello I own a 2002Ford Escort . My car sputters at stops but only w when its been driven and the car is warm.At stops I accelerate and the car pauses then a jolt and it goes. I know nothing about cars and Iam lost .
|
| Two O2 Sensor Questions... | 14 May 2005 17:06 GMT | 12 |
Are used or remanufactured O2 sensors sold as replacements for defective O2 sensors? Is using an O2 sensor from a go-fetch bone yard even a good idea? TIA,
|
| Ford Fiesta - radio/clock/fog light not working | 14 May 2005 15:10 GMT | 2 |
I tried to install a FORD CD player taking out the older cassette model which was it's standard fit. However when I unplugged the cassette radio the wires with black covers on came out of their covers, the copper wire touched metal and a small spark occured.
|
| 1994 Thunderbird VERY ODD NOISE! Help :( | 14 May 2005 12:41 GMT | 1 |
hey guys, yes i'm a noob :p , please don't hate me. anyways i have a 199 thunderbird that my mother gave me a few weeks back. what i hav noticed is, when it rains, there is a noise coming from under the hoo
|
| 94 Ford explorer vibration shutter under load Cannot find Fix? | 14 May 2005 12:10 GMT | 2 |
Hello. I have a 94 ford explorer. 182,000 miles. Original owner. Maintained very well. Problem: You can be driving down the road with your foot off the gas at any speed and no vibration. When you apply power or load the Drive train
|