| Thread | Last Post | Replies |
|
| ford taurus seat belt help | 28 Jun 2005 12:14 GMT | 1 |
I have a 2000 ford taurus the seat belt in back (middle) is stuck and we have know idea how to fix it.
|
| Questions about 2005 Crown Vic LX Sport | 28 Jun 2005 01:19 GMT | 11 |
I just bought a 2005 Crown LX Sport. I absoloutly LOVE this car. It only has one thing that I'd like to change (besides the speed limiter), and that is the automatic headlights. On my old car (A GM Product), if I left the headlights on AUTO, the day running lamps came
|
| car radio | 27 Jun 2005 16:16 GMT | 3 |
yes i bought a new car radio and when a song came on with alot of bass the radio suddley died, i put my old radio back in and it didn't work, i checked the fuse and it is ok. what is wrong with my radio?
|
| KA Heater Not Working | 27 Jun 2005 15:20 GMT | 3 |
My 2002 KA just blows cold air. Any ideas greatly appreciated.
|
| Ford Motor Company Supports Homosexual Marriage Movement | 27 Jun 2005 04:33 GMT | 32 |
You are probably unaware that Ford Motor Company is a major supporter of the homosexual movement, including homosexual marriage.
>From redefining family to include homosexual marriage, to giving hundreds of thousands of dollars to support homosexual groups and their
|
| F/S 1964 Galaxie 500 2 dr HT 35,760 original miles | 27 Jun 2005 03:36 GMT | 1 |
Very nice original Has the 289 with auto, Runs & drives great. There is NO rust & only 2 dings. Interior is like new. Just had full service & new tires drive anywhere classic. in SW Montana can ship asking $10500 have phtots call 406-660-0115 Phil
|
| **I need answer quick please**LOST KEYS | 27 Jun 2005 01:33 GMT | 1 |
I have a FORD ESCAPE. I heard that it is 200-300$ to replace keys????? is this correct? bu I read somewhere that it was only like 80$ or less I am confused. have a back up key I made that ofcourse just opens doors etc. bu
|
| Belt tensioner 97 taurus | 26 Jun 2005 19:22 GMT | 2 |
Can anyone give me a quick rundown on how to change the belt tensioner on a 97 taurus with vulcan engine? Chilton manual doesn't seem to mention it anywhere (figures). Any special tools needed? I have a fairly extensive socket set, but I've heard sometimes they use a torx bit? I ...
|
| 1996 ford escort hazard switch help | 26 Jun 2005 19:06 GMT | 1 |
the switch is on the column on top but broke as i pushed it down to use. i need to replace it but don't know if i need special tools or even if i can do it? any one done this before? help.
|
| 1999 Duratec DOHC Ford Taurus Not Blowing Air Anymore | 26 Jun 2005 17:54 GMT | 15 |
I was hoping you could advise me on a problem I'm having on a 9 Taurus. I bought it 'used' in March this year, and I guess I bough someone else's headache. I have the DOHC 24V engine. I was out driving today, and stopped at
|
| Tracking down noise in 97 Taurus | 26 Jun 2005 10:58 GMT | 2 |
97 Taurus ~120,000 miles, 3.0 vulcan engine. At idle in gear, the car makes a "buzzing" noise from the front of the car, sounds like a heat shield slapping around, but I can't see anything obviously loose. If you take it out of gear or touch the gas pedal, it goes
|
| dead mondeo 1.8 estate 93 | 26 Jun 2005 03:41 GMT | 1 |
today my mondeo came to a sudden halt and will not start but will turn over oil was found to be very low and it took 2.5 litres to top it up, my mate said that the compression is low but how do i test this any ideas please help
|
| Explorer 4.0l Engine rebuilding | 25 Jun 2005 20:20 GMT | 1 |
I have my 93 Ford Explorer sitting in the driveway, and while it runs, it's engine condition is deteriorating pretty fast. A friend of mine who is a trained and certified mechanic and who works at a Chevy dealership suggested that the engine condition in his opinion is bad ...
|
| 1998 Ford Escort Wagon | 25 Jun 2005 18:27 GMT | 1 |
I'm having some trouble with the electric but I can't find the fusebox Could anyone tell me where it is located -- windowsbroke
|
| crankshaft/camshaft | 25 Jun 2005 18:07 GMT | 2 |
2 weeks ago, I changed water pump & timing belt on 84 ford escort 1.6L 2 br AT, no AC,noPSnoPB 150K miles. I tighted the belt. In so doing moved the crankshaft position and camshaft position. I did timing adjust, compression test, vac test. All good. The car has a ping-ping
|