| Thread | Last Post | Replies |
|
| Ford settles on cracking v8 manifolds! | 05 Jul 2005 03:54 GMT | 4 |
On June 18 Blue Oval News announced that Ford settled the suits about the plastic v-8 intake manifolds. They will pay owners about a third of a billion US$. You can find the article on http://www.flamingfords.info
|
| Ford Tarus overheating | 05 Jul 2005 03:27 GMT | 13 |
Help! My ford Tarus has been overheating for some time now, and has gotten worst. I have replaced just about everything. Water pump, radiator, hoses. My thermostat was removed a couple of years ago because of heater problems, I didn't need it so the hoses were plugged. No ...
|
| '94 Ford Taurus Stopped Running. | 05 Jul 2005 03:15 GMT | 6 |
I had an exasperating moment yesterday with that car. Drove a friend to an appointment, and back. got into his driveway, and we chatted for about one minute. Care engine just stopped. NO thump, no racing, no nothing, it just stopped. I tried to start the car, the motor ...
|
| 1994 Ford Taurus, lopes while in gear | 05 Jul 2005 03:13 GMT | 2 |
Could someone please tell me what could be wrong with my 94 ford taurus, has a 3.8 engine. When in gear it kinda lopes just a bit. Have changed plugs wires, put on new throttle potition sensor, and it still does it. When you get on the gas has a bit of a dead spot. Have put on new ...
|
| 93 Topaz ( Tempo ) 2300 Engine - Crank Pulley Rattle | 05 Jul 2005 02:02 GMT | 2 |
I have a 1993 Mercury Topaz ( Ford Tempo ) with a 2300 4-cylinder engine. There is a rattling noise when the car is in gear and idling when the brake pedal is depressed. When the car is in park or when we accelerate and driving down the road the noise goes away. The noise is coming ...
|
| Where's my air filter | 04 Jul 2005 19:22 GMT | 4 |
I have a strange question here, I have a 1990 Ford Explorer and was looking under the hood the other day after hearing one of those commercials about how much gas you're wasting if your air filter is dirty and needs to be replaced... I looked under the hood but where did they ...
|
| Electrical Problem | 04 Jul 2005 14:31 GMT | 5 |
I recently purchased a 1940 Ford Coupe that is in great shape! However, I appear to be having charging problems. The battery is a brand new 6 volt unit, the voltage regulator appears to be brand new, and the ampmeter registers charge as the car is driven. I am able to start the car ...
|
| 1995 Taurus, engine won't turn off, ignition assembly issue? | 04 Jul 2005 08:50 GMT | 4 |
So, i went to change my oil today, and the bafoons at Jiffy Lube came back to me, telling me they can't turn my engine off anymore. Odd, I thought, since it's never done this before. but true, I can turn the ignition to the "off" state, and the engine continues to run. The
|
| 95 Ford Ranger | 04 Jul 2005 05:00 GMT | 11 |
My truck is getting gas and spark. It cranks over but will not start. I did find the cigarette lighter fuse burnt out. But i don't think that's it. Any comments??
|
| 95 e150 van won't start | 04 Jul 2005 01:45 GMT | 1 |
car was working perfectly, started 5 minutes ago. tried to restart the car, engine turns over like it isn't getting fuel, do not hear the "fuel pump" priming the engine as it usually does when I turn the key to the on and wait to start the engine. checked all fuses, all ok. Help. ...
|
| Ranger a/c | 03 Jul 2005 22:02 GMT | 3 |
I have a '95 ranger 4.0litre. The a/c compressor is replaced. I have installed 134a oil and 26oz. of 134a refrigerant. The compressor will kick in intermitantly. I have put 12 volts directly from the battery to the clutch and it engages and runs the compressor and blows very cold ...
|
| Help : Need vacuum advance for a Ford 3.0 Taurus engine. | 03 Jul 2005 19:31 GMT | 2 |
I want to put a ford 3.0 taurus engine in an old forklift but Haven' found a distributor with a vacuum advance. All help will be appreciated Brya
|
| '94 Boid: brakes whine | 03 Jul 2005 19:30 GMT | 1 |
Re: '94 Boid: brakes whine Hi, I belong to '94 Tbird LX V8, 60K mi. Garage replaced front disc brake pads with Raybestos
|
| merkur scorpio starter bolt pattern | 03 Jul 2005 19:22 GMT | 2 |
I have a Ford Bronco II but the engine block was replaced with a scorpio engine block. Now having problem with the original bronco starter not engaging correctly with the flywheel. Does anyone know if the merkur scorpio starter has the same bolt pattern as the bronco II? Dont ...
|
| Escort starting problem | 03 Jul 2005 19:15 GMT | 2 |
Can anyone throw a light on this. L reg 1800 EFI manual, will not start. If the car is pushed forewords (or backwards), a few inches (not in gear and ignition off......) the car will then start ?? The ABS sensors are the only thing related to moving
|